Allicdata Part #: | PWD-5526-08-NNN-79-ND |
Manufacturer Part#: |
PWD-5526-08-NNN-79 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | CONN 8WAY DIVIDER |
More Detail: | RF Power Divider 5GHz ~ 19GHz Isolation (Min) 20dB... |
DataSheet: | PWD-5526-08-NNN-79 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Insertion Loss: | 0.4dB |
Frequency: | 5GHz ~ 19GHz |
Specifications: | Isolation (Min) 20dB |
Size / Dimension: | 3.500" L x 4.000" W (88.90mm x 101.60mm) |
Package / Case: | Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A RF power divider (or power splitter) is a device that takes a single input signal and splits it into multiple outputs of equal or reduced amplitudes, depending on the required application. The PWD-5526-08-NNN-79 is a high-performance, wideband, ruggedized power divider designed specifically for operation in noise-sensitive environments. It is available in either a 50 Ω or a 75 Ω impedance configuration and offers excellent isolation between input and output ports.
The PWD-5526-08-NNN-79 is designed to operate over a broad frequency range with excellent performance and repeatability. It is an ideal solution for applications such as base station signal combining/splitting, antenna control systems, multiplexing, and more. The device is capable of handling high RF power and providing excellent efficiency with very low signal loss.
The working principle of the PWD-5526-08-NNN-79 is based on a Wilkinson Power Divider, which consists of a Balun-coupled transformer, a pair of resistive quarter-wave lines, and a pair of quarter-wave shorting stubs. The input signal is fed to the Balun, where it is split into two equal amplitudes. These two signal components then travel through the respective quarter-wave lines before being recombined at the output through the quarter-wave shorting stubs, resulting in two equal and in-phase RF output signals. The amount of power distributed between the output ports is determined by the length of the quarter-wave lines and the length of the shorting stubs.
The PWD-5526-08-NNN-79 is well-suited for applications that require high performance and wide dynamic range. It is designed to operate in environments with low levels of phase and amplitude distortion, and offers excellent isolation from model-to-model variations and environmental effects. The device is also highly efficient, and its output ports are impedance-matched for optimal power utilization.
The PWD-5526-08-NNN-79 is designed to be used in a variety of applications such as antenna systems, multiplexing, signal splitting/combining, base station signal combining/splitting, and more. Its small size, low cost, and high reliability make it an ideal choice for applications where optimized performance and wideband response are desired. The device is also well-suited for noisy environment applications due to its excellent isolation between input and output ports.
The specific data is subject to PDF, and the above content is for reference
IC BOOSTER/SPLITTER ANT 8-SOICRF Power D...
IC BOOSTER/SPLITTER ANT 8-SOICRF Power D...
POWER DIVIDER 8SOICRF Power Divider 1.65...
POWER DIVIDERRF Power Divider
IC DIVIDER PROGR LO NOISE 16-QFNRF Power...
IC DIVIDER X4 SIGE 8-MSOPRF Power Divide...