PWD-5533-02-SMA-79

PWD-5533-02-SMA-79 is one of the shared functioning RF power dividers/splitters, which is widely adopted in some electronics applications. Through the power division of the inputs, the signals are mathematically split into different outputs. As a splitter/divider in power which is mainly used in the microwave power spectrum, a PWD-5533-02-SMA-79 has a wide range of application fields and working principles.

Application Field:

The application of the PWD-5533-02-SMA-79 RF power divider mainly lies in the field of microwave system. It is used to divide multiple input signals and has very wide application in frequency range up to 6 GHz, such as aerospace defense telecom instrumentation, satellite communication system, mobile communication base station, electronic countermeasure systems, medical treatment, and ground traffic arrangements.Moreover, the PWD-5533-02-SMA-79 RF power divider is also used in modern communication system, which is used to divide and combine the power of multiple input signals in the application of amplification, filtering, directional control, harmonic suppression and signal measurement.Additionally, in order to analyze the amplitude and phase of the RF signal, the analysis of the several inputs can be achieved by using the PWD-5533-02-SMA-79 power divider.

Working Principle:

The working principle of the PWD-5533-02-SMA-79 RF power divider is based on the electrical energy transfer between the input port and multiple output port. It divides the input signal into two outputs with equal amplitude but opposite phase.It works by using the principle of electromagnetic waves. An electromagnetic wave comes from the integrated input signals, which is electrically transmitted into another with the same amplitude and phase, but different directions.To ensure the operation perfect functioning, there should be less than 5 millimeters of separation between the two output ports of the PWD-5533-02-SMA-79 power divider. This is because the separation can result in slight waves in the transmitted signal, which will result in a power loss.Also, the power divider must be at least 1.5dB attentuated when the transmitter is switched off. This is to ensure the safety of the equipment and the personnel.

Because of its easy and simple application, the PWD-5533-02-SMA-79 RF power divider is adopted widely in microwave power spectrums. It can be used to divide and combine multiple input signals, and to analyze the amplitude and phase of the RF signal. The application fields are in aerospace defense telecom instrumentation, satellite communication system, mobile communication base station, electronic countermeasure systems, medical treatment, and ground traffic arrangements.