Q 27,120-JXS22-10-10/10-FU-WA-LF

Series:	JXS22-WA
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	27.12MHz
Frequency Stability:	±10ppm
Frequency Tolerance:	±10ppm
Load Capacitance:	10pF
ESR (Equivalent Series Resistance):	50 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-20°C ~ 70°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Height - Seated (Max):	0.024" (0.60mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals: Q 27,120-JXS22-10-10/10-FU-WA-LF Application Field and Working Principle

Crystals are an essential part of electronic components and play a significant role in modern electronics. In general, they are used as oscillators in electronic oscillators and in radio frequency (RF) circuits. The Q 27,120-JXS22-10-10/10-FU-WA-LF crystal is no exception. In this article, the application field and the working principle of this crystal are discussed. The primary application field of the Q 27,120-JXS22-10-10/10-FU-WA-LF crystal is for use in low frequency oscillators because of its ability to generate a stable and accurate frequency over a wider range. This crystal is commonly used in computers, telecommunication systems, and RF circuits.In terms of its working principle, the Q 27,120-JXS22-10-10/10-FU-WA-LF crystal operates on the principle of mechanical resonance. This type of crystal is made out of two piezoelectric plates that are electrically polarized along their edges. The plates are mounted on a holder and connected to two electrodes. When an alternating voltage is applied, the plates vibrate at a frequency determined by its material.The main components of the Q 27,120-JXS22-10-10/10-FU-WA-LF crystal include the holder, electrodes, and the two piezoelectric plates. The holder is usually made of brass, stainless steel, or some other metal material and is used to hold the two electroded plates in place. The two electrodes are usually connected to each other by a conductor. The two plates are then connected to the electrodes and mounted on the holder. Once all the components are assembled, the crystal is ready to be used as an oscillator. When an alternating voltage is applied to the crystal, the two plates vibrate at a predetermined frequency. The frequency of the oscillator is determined by the physical properties of the crystal material and the size of the plates. This frequency can then be used for controlling electric current or for the transmission of data. The reliability of the Q 27,120-JXS22-10-10/10-FU-WA-LF crystal is also dependent on the material and construction of the crystals. The crystal must be kept at a constant temperature and in an environment that is free from contaminants in order to maintain its accuracy and stability. Aside from this, the crystal should also be handled with care in order to prevent any damage.In conclusion, the Q 27,120-JXS22-10-10/10-FU-WA-LF crystal is an essential component for electronics, computers, telecommunication systems, and RF circuits. Its primary application is for use in low frequency oscillators because of its ability to generate a stable and accurate frequency over a wider range. Its working principle is based on the principle of mechanical resonance, whereby two piezoelectric plates vibrate at a predetermined frequency when an alternating voltage is applied. The reliability of the crystal can be improved by maintaining it at a constant temperature and in an environment free from contaminants.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description