Q 38,40-JXS32-10-10/10-FU-WA-LF Crystals, Oscillators, Resonators |
|
Allicdata Part #: | 1908-1223-2-ND |
Manufacturer Part#: |
Q 38,40-JXS32-10-10/10-FU-WA-LF |
Price: | $ 0.34 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Jauch Quartz |
Short Description: | CRYSTAL 38.4MHZ 9PF SMD |
More Detail: | 38.4MHz ±10ppm Crystal 9pF 40 Ohms 4-SMD, No Lead |
DataSheet: | Q 38,40-JXS32-10-10/10-FU-WA-LF Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.30240 |
3000 +: | $ 0.29232 |
5000 +: | $ 0.28224 |
10000 +: | $ 0.27216 |
Specifications
Series: | JXS22-WA |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 38.4MHz |
Frequency Stability: | ±15ppm |
Frequency Tolerance: | ±10ppm |
Load Capacitance: | 9pF |
ESR (Equivalent Series Resistance): | 40 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 85°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.098" L x 0.079" W (2.50mm x 2.00mm) |
Height - Seated (Max): | 0.024" (0.60mm) |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals
Crystals, also called resonators, are electronic components that are placed in a circuit to create and maintain an electrical signal. They can be used to control and manipulate the shape, frequency, and amplitude of an electrical signal. Crystals are the most common form of resonator used in the electronics industry, and are found in a wide variety of applications.One of the most common types of crystals is the quartz crystal, which is comprised of two electrodes that are laid perpendicular to each other. When an electric current passes through the electrodes, it creates an alternating electric field, which causes the quartz to vibrate. This vibration helps to create and maintain a precise, continuous frequency in the signals produced by the circuit.Another type of resonator is the quartz crystal oscillator. This type of oscillator uses a quartz crystal that is placed between two electrodes, which are usually referred to as the “plate” and the “ground”. The oscillator works by using the voltage created by the electric field between the electrodes to create a standing wave at a specific frequency, which is then repeated at intervals determined by the crystal. By accurately controlling the voltage across the plate and ground electrodes, it is possible to achieve a precise and stable frequency output.The use of quartz crystals in the electronics industry is widespread and versatile. They are used in a variety of applications, including clocking systems, radio frequency oscillators, and filters. Clocking systems use quartz crystals to maintain a precise and continuous timing signal, while radio frequency oscillators use quartz crystals to generate precise radio frequency outputs. In addition, quartz crystals can also be used in filters to block unwanted frequencies, or to make sure that desired frequencies are passed.The Q 38,40-JXS32-10-10/10-FU-WA-LF crystal is a type of quartz crystal oscillator whose primary use is in audio applications. It is designed to provide accurate and stable performance with a lower phase noise than other quartz oscillators. The crystal has a frequency range from 1.5 kHz to 15 MHz, making it suitable for a wide range of audio applications such as digital-to-analog converters (DACs) and amplifiers. In addition, the crystal enables the production of extremely low distortion products, providing superior sound quality. The Q 38,40-JXS32-10-10/10-FU-WA-LF crystal operates on the principle of piezoelectricity. This term refers to the ability of some materials to change shape when they are subjected to an electric field. When a crystal is placed between two electrodes and an electric field is applied, the shape of the crystal will change and cause the crystal to vibrate at a specific frequency. The frequency of the crystal’s vibration depends on the size and shape of the crystal, making quartz crystals extremely versatile and accurate.In conclusion, the Q 38,40-JXS32-10-10/10-FU-WA-LF crystal is a type of resonator designed for use in audio applications. It operates on the principle of piezoelectricity and can produce extremely precise and low distortion signals. Its frequency range of 1.5 kHz to 15 MHz makes it suitable for a variety of audio applications, and it is widely used in digital-to-analog converters and amplifiers. The Q 38,40-JXS32-10-10/10-FU-WA-LF crystal is a versatile and reliable component for use in electronics circuits.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "Q 38" Included word is 7
Part Number | Manufacturer | Price | Quantity | Description |
---|
LW Q38E-Q2OO-3K5L-1 | OSRAM Opto S... | 0.06 $ | 1000 | LED COOL WHITE DIFFUSED 0... |
LW Q38G-Q2OO-3K5L-1 | OSRAM Opto S... | 0.06 $ | 1000 | LED COOL WHITE DIFFUSED 0... |
LW Q38E-Q2R2-3K5L-3X4X-5-R18-NK | OSRAM Opto S... | 0.0 $ | 1000 | LED CHIPLED 0603White 820... |
LW Q38E-R1R2-3K5L-3Y4X-5-R18-XX | OSRAM Opto S... | 0.0 $ | 1000 | LED CHIPLED 0603White LE... |
LW Q38G-Q2R2-3K5L-3X4X-5-R18-NK | OSRAM Opto S... | 0.0 $ | 1000 | LED CHIPLED 0603White LE... |
LW Q38E-Q1OO-3K6L-1 | OSRAM Opto S... | 0.07 $ | 416000 | LED COOL WHITE DIFFUSED 0... |
LW Q38G-Q1OO-3K6L-1 | OSRAM Opto S... | 0.07 $ | 200000 | LED COOL WHITE DIFFUSED 0... |
Latest Products
CSTCE8M59G55A-R0
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
416F520X3CLT
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
416F500X3AKT
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
416F48022CKT
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
416F44023ITT
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
416F406X2AST
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...