QTE-028-01-F-D-DP-GP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

QTE-028-01-F-D-DP-GP board connectors are rectangular array, edge type directors used for mezzanine board-to-board applications. They are designed typically for high density, multi-lane interactions realized through integrated signal switching.

The device is able to connect two boards at up to 8 lanes of data transfers, each lane with 8 to 12 data bits. Lanes are connected via its P-GP, or Flat Ground Plate, which is optimized to make high-density, multi-lane applications as easy as possible. The device also provides two lanes per pin, meaning four lanes are connected with a single contact.

The device is a unitized connector, allowing for easy and reliable mounting and frame construction. It also offers several options for contact materials, such as brass and stainless steel.

The device is equipped with a minimum signal switch array for two boards, with two data lanes each. The array contains four commonly used signal switch lines: TX, RX, RTS, and CTS. TX is the transmission line from the transmitting side, RX is the reception line from the receiving side, and RTS and CTS are the control lines of the receiver and the transmitter.

When a high-speed signal is transmitted or received, the signal switch array is used to ensure that the timing and voltage of the signal remain secure. The circuit built on the QTE-028-01-F-D-DP-GP device includes the signal switch array, and it can be configured according to the type of signal that needs to be transferred, such as Ethernet, InfiniBand, and PCI Express.

In order to ensure the signal\'s fidelity, the device\'s array provides on-die termination, establishing low-frequency and high-frequency electrical characteristics. This helps to control the signal\'s waveform, detect noise, and eliminate signal distortion.

The device also offers multiple power and ground pins for stable connection. With this, the device can provide exceptional noise protection and power efficiency. Plus, the contacts are located on the edge of the device, making them easy to access in a board-to-board application.

Overall, QTE-028-01-F-D-DP-GP board connectors are designed to make board-to-board applications easier and more reliable. With its eight lanes of data transfers and signal switching array, it can be used for many applications, such as medical devices, computers, and aerospace systems.

The specific data is subject to PDF, and the above content is for reference