QTH-120-01-H-D-A

Series:	Q Strip® QTH
Packaging:	Bulk
Part Status:	Active
Connector Type:	Header, Outer Shroud Contacts
Number of Positions:	240
Pitch:	0.020" (0.50mm)
Number of Rows:	2
Mounting Type:	Surface Mount
Features:	Board Guide, Ground Bus (Plane)
Contact Finish:	Gold
Contact Finish Thickness:	30.0µin (0.76µm)
Mated Stacking Heights:	5mm
Height Above Board:	0.160" (4.06mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Arrays, Edge Type, Mezzanine (Board to Board)

The QTH-120-01-H-D-A is a one of the most common types of rectangular connectors used in the arrays and edge type, board to board mezzanine systems. It is ideal for applications where high-speed, miniaturized connection is needed for a wide variety of applications.

Application Field and Working Principle of NPTH-120-01-H-D-A

The QTH-120-01-H-D-A is ideal for both high-volume and low-volume applications. It is a high-speed, low-cost, miniaturized connection system. It is suitable for a wide range of applications, such as in automotive, communications, medical, industrial, and even consumer applications. The QTH-120-01-H-D-A has a wide range of features, including its wide range of mating configurations, high speed, low power consumption, and high reliability. The QTH-120-01-H-D-A is a self-mating connection system. It is designed for high-speed data transmission. The QTH-120-01-H-D-A uses a low-friction contact system to reduce insertion and release forces. It has a combination of metalized and non-metallized contacts that allow electrical contact and secure fastening. The QTH-120-01-H-D-A has no exposed metal parts, which prevents short circuits and improves contact integrity. The QTH-120-01-H-D-A uses two independent optical fiber contacts for high-speed data transmission. The fiber contacts are made of two separate pieces: a transmitter and a receiver. The transmitter is connected to a transmitter contact on the device and the receiver is connected to a receiver contact on the device. The receiver contact is a simple optical fiber, while the transmitter contact is a fiber with an additional layer of reflective material to help the light transmission. The QTH-120-01-H-D-A has optional dual-mode contacts, which provide additional power and/or signals for additional communications protocols. The QTH-120-01-H-D-A also features a three-point mechanical retention system for secure mating. This system allows for easy insertion and removal without the use of tools. The mechanical retention system has an integrated latch with spring tension that allows for a positive connection. Additionally, the QTH-120-01-H-D-A features a three-point hermetically sealed housing that improves resistance to shock and vibration. Finally, the QTH-120-01-H-D-A has an optional rear cover and integrated LED that provide easy access and visual indication of connection status. The LED can be used to indicate an open, connected, or busing state. Additionally, the integrated LED can be used to indicate a power or communication protocol-specific status. In summary, the QTH-120-01-H-D-A is a high-speed, low-cost, miniaturized connection system used in a wide range of applications. It has a combination of metalized and non-metallized contacts that allow for electrical contact and secure fastening. The QTH-120-01-H-D-A uses a low-friction contact system to reduce insertion and release forces. It also features a three-point mechanical retention system and optional rear cover and integrated LED for easy access and visual indication of connection status.

The specific data is subject to PDF, and the above content is for reference