QXK2J683KTP7FM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors are electrical components that have many different uses within consumer electronics. They are composed of two separate electrical components, a dielectric film and two metallic electrodes. They have the ability to store electrical charge when a voltage is applied to the conductor. The most common types of film capacitors are polyester, polypropylene, polycarbonate, and polypropyllene terephthalate.

The QXK2J683KTP7FM is a film capacitor that has a variety of applications and a wide range of uses. It is a polyester film capacitor designed for general-purpose AC and DC applications. The capacitor is non-polarized and has a temperature rating up to 105°C. It has a capacitance range of 4.7nF to 470nF and a voltage rating of 250V AC or DC.

The primary application of the QXK2J683KTP7FM is for use in AC and DC circuits. It is used for power electronics and other applications such as noise suppression, feedback loop stabilization, coupling and decoupling, signal bypassing and more. It can be used for timing circuits, neutralization of RF signals, and to increase the accuracy of electronic instruments. It is also used for many AGC circuits, low-pass filtering applications, and as a charge storage device.

In addition to being used for power electronics and AGC circuits, the QXK2J683KTP7FM can be used as a snubber capacitor. It can be used to reduce the high frequency noise generated by the switching of an SCR or TRIAC. It is an ideal choice for high frequency circuits where a high voltage rating is required. It can also be used to reduce the DC voltage of motor controllers and other power factor correction instruments.

The working principle behind the QXK2J683KTP7FM is the same as all other film capacitors. When a voltage is applied, it creates a charge on the film that is proportional to the applied voltage. This charge accumulates until the dielectric of the capacitor is saturated. As more voltage is applied, the capacitance increases. As the voltage is decreased, the accumulated charge is dissipated and the capacitance begins to decrease. The maximum capacitance is determined by the size of the dielectric film and the voltage rating of the capacitor.

The QXK2J683KTP7FM is a versatile film capacitor that is ideal for a variety of applications. It has a wide range of uses and can be used for general purpose AC and DC circuits, power electronics, AGC circuits, and snubber applications. It is designed with a temperature rating up to 105°C and a voltage rating of 250V. It has a maximum capacitance of 470nF and works on the same principle as all film capacitors – when a voltage is applied, a charge is created on the film. This charge is proportional to the applied voltage and determines the capacitance of the capacitor.

The specific data is subject to PDF, and the above content is for reference