R0.25S12-153.3/H-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are commonly used in various industrial and commercial applications to convert the input DC supply into the required output voltage level and current rating. The R0. 25S12-153.3/H-R is one such DC-DC converter that bridges the gap between the lower input voltage of the DC source and the higher output voltage required. The converter is capable of regulating the output voltage from 6 to 12 VDC and the output current from 2 to 22 A depending on the application.

The R0.25S12-153.3/H-R DC-DC converter is also known as a switch-mode power converter. This is because it employs a switching semiconductor device like a power transistor, to convert the direct current from the input source into alternating current (AC). The AC is then rectified back to the DC to get the desired output. The frequency of the switching is kept constant most of the times and is dependent on the input frequency. This switching frequency determines the efficiency of the converter.

The R0.25S12-153.3/H-R converter can be used to regulate the output voltage from 6 to 12 VDC and output current from 2 to 22 A. It comes with a single input and double output well design and is a board-mounted device. It is also protected against reverse current, over voltage and short circuits. The device comes with a built-in soft-start feature to avoid inrush current. It also has a wide range of safety features

The primary application of the R0.25S12-153.3/H-R DC-DC converter is in industrial automation equipment. The equipment includes, but is not limited to, instruments, robots, cameras, printers, motor controllers, and power supplies. It can also be used in renewable energy and solar energy applications to generate the required output voltage and current. Additionally, it is also used in servo motor control systems, battery powered devices, and low voltage DC applications.

The working principle of the R0.25S12-153.3/H-R DC-DC converter is fairly simple. When the input voltage is applied to the converter, it is rectified and then converted into a fixed frequency AC switching signal. This AC signal is further inverted by the power transistors and smoothed by the inductor and capacitor before being rectified and regulated again to get the required output voltage and current. The regulator part of the converter monitor the output voltage and current and adjusts the reference voltage to maintain the output voltage and current within the desired range.

The R0.25S12-153.3/H-R DC-DC converter is an efficient and reliable device that can be used in various industrial and commercial applications. It is capable of converting the lower input voltage into the higher output voltage and current rating required for the application. It is protected against reverse current, over voltage, and short circuits and comes with a built-in soft-start feature. Thus, the R0.25S12-153.3/H-R DC-DC converter is an invaluable tool for industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference