R11-1-10.0A-38630-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A R11-1-10.0A-38630-5 circuit breaker is an electrical protection device designed to control current, limit overloads and short-circuit protection. It is typically used in electrical systems ranging from commercial, industrial, and even residential application. It is also used to interrupt overloaded electrical circuits or high-current short-circuits. In order to effectively enable the circuit breaker to work, it must be installed according to the application requirements, meaning it must be able to handle all the current, voltage and frequency ranges associated with the application. The working principle of the R11-1-10.0A-38630-5 circuit breaker is based on the principle of thermionic conduction heating, which is generated by passing electric current through the bimetallic strip of the device. When the temperature of the bimetallic strip increases due to the current, it bends and allows a physical separation of the two contacts, thus disconnecting the circuit.

The purpose of the circuit breaker is to prevent an overload of electric current in an electrical circuit, which can result in a short circuit or damage to the electrical components of the system. This can cause electrical fires, electric shocks, and other life-threatening hazards. In order to ensure this does not occur, the circuit breaker is designed to trip when the current in the circuit becomes too high. The amount of current the breaker will allow before tripping is dependent on the rated capacity of the breaker and the characteristics of the environment in which it is installed.

The R11-1-10.0A-38630-5 circuit breaker is made from durable components, such as brass, aluminum, stainless steel and other non-corrosive materials. This allows the breaker to effectively perform its task in all types of conditions. The device is designed to meet the applicable requirements of UL 489, which is a standard for circuit protection used in the United States. It also complies with IEC 60947-2, which is an international standard for circuit protection.

Installing the R11-1-10.0A-38630-5 circuit breaker is a relatively straightforward process. It can be easily mounted onto its chassis or wall, and the two wires that come with the device make the connection from the circuit breaker to the electrical load. The installation process should be done in accordance with the instructions provided by the manufacturer, as not following the instructions may lead to the risk of an overload or other safety issues. Once the circuit breaker is in place and connected to the electrical load, it is ready to be used for its intended purpose.

The specific data is subject to PDF, and the above content is for reference