R11-1-.500A-B06CV-V

Series:	SNAPAK®
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	500mA
Number of Poles:	1
Actuator Type:	Rocker
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers - R11-1.500A-B06CV-V Application Field and Working Principle

Circuit breakers are an essential component of any electrical system. They are usually installed in two places, between electrical lines and consumer equipment, and between consumer equipment and ground. The purpose of this device is to protect both the electrical system and the consumer against shock and damage to equipment.Circuit breakers are available in a variety of amperage ratings as well as voltage ratings. For example, the R11-1.500A-B06CV-V is a type of circuit breaker that can be used in high-voltage systems. It is rated for 1,500 amperes and 600 volts.It is important to understand and adhere to the national electrical codes (NEC) and local electrical codes (LCEC) when working with circuit breakers. The code outlines safety requirements and regulations for electrical systems. To be sure a circuit breaker is properly installed, a licensed and certified electrician should be hired.The R11-1.500A-B06CV-V circuit breaker works through magnetically-tripped contact movements. Inside the device, there is a moveable component, referred to as the latch. The latch is connected to a magnetic relay, which is triggered when an over-current situation occurs.When an over-current passes through the circuit breaker, the magnetic relay will be triggered, inducing force in the latch, which in turn causes it to move and disconnect the current flow. This not only protects the circuit, it also acts as a failsafe in case the over-current trips a downstream device.The R11-1.500A-B06CV-V circuit breaker is designed for use in electrical systems with a voltage rating of 600 volts. This type of circuit breaker is appropriate for use in industrial applications, such as manufacturing and processing plants. Many manufacturers rely on the R11-1.500A-B06CV-V circuit breakers for their safety and reliability.These circuit breakers are slightly more expensive than traditional breakers, due to the lower amperage and higher voltage rating, as well as the technology necessary to detect an over-current occurrence. As a result, they are often used in critical applications.In the event of an over-current situation, the R11-1.500A-B06CV-V circuit breaker will shut off the current, thus protecting the circuit and equipment while minimizing the risk of fire or shock damage. In addition, the breakers can also be manually reset, allowing the circuit to be re-energized when necessary.Overall, the R11-1.500A-B06CV-V circuit breaker is a highly reliable and safe device, which is essential for any electrical system. Although more expensive than traditional breakers, it is well worth the additional cost for the life-saving protection it provides.

The specific data is subject to PDF, and the above content is for reference