R11-62F-7.50A-B201EV

Circuit Breakers are essential components found in many electrical systems. They protect wiring and other components from dangerous overloads and short circuits. The R11-62F-7.50A-B201EV is a type of circuit breaker most commonly used in the industrial and commercial fields.The R11-62F-7.50A-B201EV is an Automatic Reset Type circuit breaker. It is designed for use in low-voltage switchboards or panel boards. The breaker is single pole, with a 50/60 Hz current rating of 7.5 Amps. The breaker eliminates the need for manual resetting after a trip, as it automatically resets itself when power is restored.The R11-62F-7.50A-B201EV is a timed interrupt-type breaker. This type of breaker works by cutting off power to the system after a fixed period of time, usually around two to five seconds. The interrupt time can be adjusted if needed. The breaker is rated to withstand short-circuit currents of up to 10,000A and has a maximum Continuous Interrupting Capacity (CIC) of 10kA.The R11-62F-7.50A-B201EV is UL (Underwriters Laboratories) recognized and CSA (Canadian Standards Association) certified. This ensures the circuit breaker meets safety and quality standards and should be reliable when installed properly. The breaker is designed for panel mounting and has a 300V AC rating.The R11-62F-7.50A-B201EV circuit breaker is usually used to protect industrial and commercial switchboards and panel boards from overloads and short circuits. The breaker can be used in a variety of environments, including industrial, commercial, and residential applications. It is designed to protect critical equipment and wiring from dangerous electrical surges or other electrical anomalies.The main purpose of the R11-62F-7.50A-B201EV circuit breaker is to guard against dangerous overloads and short circuits. If the circuit breaker detects an excessive current, it will automatically trip and disconnect the power. This helps prevent wiring damage and other equipment failure. Additionally, the breaker will automatically reset when the power is restored, saving on the need for manual resetting.In conclusion, the R11-62F-7.50A-B201EV is a UL and CSA recognized and rated circuit breaker that is used to protect industrial and commercial switchboards and panel boards from overloads and short circuits. The breaker is designed to be automatically reset when power is restored. It is an important component for any electrical system and can help prevent equipment damage and wiring failure caused by dangerous electrical anomalies.