R15P3.3D/P/R6.4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic devices that regulate the voltage of a source of an electrical power supply. A DC-DC converter can be used to convert an unregulated DC voltage (like a battery) to a regulated DC voltage such as 5V or 12V. It can also be used to adjust the output voltage of a DC power supply. The R15P3.3D/P/R6.4 is an example of a DC-DC converter. Its application field and working principle are discussed in this article.

The R15P3.3D/P/R6.4 is a high-efficiency buck-type DC-DC converter that is well-suited for applications such as personal computers, telecom systems, and power supplies. The input voltage range for this converter is between 2.5V and 28V, and the output voltage range is between 0.5V and 5.3V. It has excellent line and load regulation as well as low ripple and noise. It has a typical efficiency of 93% (at 12V-12V) and a maximum current of 3A.

The working principle of the R15P3.3D/P/R6.4 is based on a buck-type topology. The converter is a two-stage switching regulator that uses a field effect transistor (FET) as a switching device. The FET is driven by an oscillator that controls the frequency and the duty cycle of the switching. The output voltage is regulated by comparing the output voltage with an internal reference voltage. When the output voltage is lower than the reference voltage, the FET is turned on, and when the output voltage is higher than the reference voltage, the FET is turned off.

The R15P3.3D/P/R6.4 offers a variety of features for system integration. It has a power good indicator, current limiting, short circuit protection, over temperature protection, remote soft start, and a selectable hysteresis control. It also has an adjustable switching frequency, which can be set up to 400 kHz. The high switching frequency makes it possible to use smaller components for lower EMI and RFI.

In summary, the R15P3.3D/P/R6.4 is a high efficiency, buck-type DC-DC converter suitable for a variety of applications. It has a wide input voltage range, low output noise and ripple, and a high efficiency of up to 93%. It also provides several features for system integration such as power good indicator, current limiting and a selectable hysteresis control. It is an excellent choice for designing power supplies for portable or space-constrained devices.

The specific data is subject to PDF, and the above content is for reference