R1D12-2409/H-R

Current - Output (Max):	56mA, 56mA
Control Features:	--
Size / Dimension:	0.60" L x 0.42" W x 0.28" H (15.2mm x 10.7mm x 7.0mm)
Package / Case:	12-SMD Module, 10 Leads
Mounting Type:	Surface Mount
Efficiency:	78%
Operating Temperature:	-40°C ~ 100°C
Features:	SCP
Applications:	ITE (Commercial), Medical
Voltage - Isolation:	3kV
Power (Watts):	1W
Series:	ECONOLINE R1D
Voltage - Output 3:	--
Voltage - Output 2:	-9V
Voltage - Output 1:	9V
Voltage - Input (Max):	26.4V
Voltage - Input (Min):	21.6V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC to DC converters are electrical circuits that are used to change the input voltage to another value at the output. The R1D12-2409/H-R series of DC to DC converters is a highly efficient line of products that provide superior electrical performance and long term reliability. This series of converters is designed to support a wide range of applications, and are used extensively in commercial, industrial, medical, military and aerospace applications.The R1D12-2409/H-R is a series of 24V DC/DC converters designed to convert an input voltage of 9V to 24V DC at the output. This series of converters has a low output noise, and provides a maximum of 1A output current with a ripple and noise of less than 30mV RMS. The high efficiency of these converters, up to 92%, makes them ideal for use in applications with limited power budgets where optimal energy savings is essential.The working principle of the R1D12-2409/H-R is based on a buck-boost converter topology. The input voltage is first rectified and filtered, and then the rectified DC voltage is applied to the switching input stage. The switching stage consists of a P-channel MOSFET, which is used to switch the load to the voltage input. The switching frequency is determined by the frequency control circuit, which is set to provide a maximum of 10kHz for this series of converters. The output is then regulated by a feedback signal generated by the output voltage sense circuit connected to the output and compared to the reference voltage. The voltage regulation is done by adjusting the duty cycle of the MOSFET. The output voltage is equal to the product of the input voltage and the duty cycle of the MOSFET.The R1D12-2409/H-R converts a 9V input voltage to a 24V output voltage with high efficiency and low noise. It is a highly reliable and efficient range of DC to DC converters that is designed to handle a wide range of applications. This series of converters is suitable for use in commercial, industrial, medical, military and aerospace applications for energy savings and long-term reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description