R21-1-20.0A-34020-1-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

R21-1-20.0A-34020-1-V circuit breakers are designed for a variety of applications, ranging from residential, commercial, industrial, and military purposes. These products are designed for use in environments where protection from overcurrent, short circuit, and overvoltage is required. Their primary job is to protect electrical wiring from dangerous overcurrents that could cause fires and other hazardous consequences.

The primary purpose of the R21-1-20.0A-34020-1-V circuit breaker is to automatically sense conditions that may lead to the damage or destruction of the equipment, wiring, or components due to overcurrent, short-circuiting and overvoltage. When the breaker senses overload, underload, or other dangerous conditions, it will automatically trip, which then disengages power from whatever protected circuit is subject to these conditions. This helps to prevent fires and other potential hazards from occurring.

The R21-1-20.0A-34020-1-V circuit breaker operates on a pass-through voltage capacity, meaning that it will allow current to flow until the voltages reach a certain limit. This limit is set by the breaker itself and is adjustable depending on the application. Once the set limit is reached, the breaker trips, thereby cutting off power to the protected circuit. In order to reset the breaker, the voltage must be brought down to a safe level. Some breakers have a manual reset button that must be pressed after the voltage has been reduced; other breakers automatically reset, allowing power to be restored once the voltage has been reduced to a safe level.

The R21-1-20.0A-34020-1-V circuit breaker is not only used to protect circuitry from overcurrent, short-circuit, and overvoltage, but it is also designed to protect circuits from any instance of overloading or underloading. It will prevent overloads from occurring by cutting off power when the current reaches a certain level, thus preventing any potential damage from occurring. Additionally, it will prevent underloading from occurring by limiting the current flow to the desired level.

The R21-1-20.0A-34020-1-V circuit breaker is designed with an adjustable trip point as well, which can be adjusted according to the application. The adjustable trip point allows the breaker to trip at different points if needed, thus increasing its overall protection capabilities. This adjustable trip point feature is particularly useful when working with sensitive equipment or in high-voltage applications.

When it comes to safety, the R21-1-20.0A-34020-1-V circuit breaker takes no chances. This is why the breaker is one of the most commonly used products for industrial and military applications. With its adjustable trip point and automatic reset functionality, it is well suited for a variety of scenarios and offers a great level of protection for any type of application.

The specific data is subject to PDF, and the above content is for reference