R21-1REF..S01010907

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are an essential device in electrical engineering. They are used to detect overloads, shorts, and faults in electrical power systems and are responsible for automatically switching off and disconnecting the circuits when they become unstable, preventing further damage to the system.R21-1REF..S01010907 is a type of circuit breaker, typically used to protect medium-voltage networks. Their design and function are based on the standard on-load circuit breaker technology, but their specific application fields and working principles are designed for a higher grade of operation and safety.

Application fields

R21-1REF..S01010907 can be applied in a wide range of network types and applications. While they are primarily designed for medium-voltage electrical networks, they are also suitable for switching and motor operations, such as those found in motor centrifuges, soft starters, arc welders, and cranes. Additionally, they can be used in solar and wind farms, battery strings, and diesel generators.

The types of loads that can be protected by R21-1REF..S01010907 range from simple AC to complex DC and generator loadings. In addition, they can be used to protect against sags and surges, or provide sensitive protection of power transmission lines.

Working principle

The working principle of R21-1REF..S01010907 is based on the principle of overcurrent monitoring. Current is measured by a sensing device – usually a current transformer – with the output signal then sent to the circuit breaker’s control unit. When the detected current is higher than the preset limit, the circuit breaker will trip and cut off the power supply in order to protect the system.

R21-1REF..S01010907 also has the capability to distinguish between transient and permanent faults. A permanent fault may be caused by an overload of the system, in which case the breaker will trip and stay in the tripped position until manually reset. On the other hand, a transient fault will cause the breaker to trip momentarily, and then automatically reset itself.

An added feature of R21-1REF..S01010907 is its ability to monitor the performance of the electrical system remotely. This is achieved by connecting a communications module to the breaker, which allows it to be monitored and controlled through various communication networks, such as mobile phone networks or the Internet.

In conclusion, R21-1REF..S01010907 is a reliable, high-performance circuit breaker designed for use in medium-voltage networks. While its application fields are varied, its main purpose is to detect and protect against overloads and faults, both in terms of regulation and safety. Its operating principle is based on an overcurrent monitoring system, allowing the breaker to detect both transient and permanent faults, and to be monitored and controlled remotely through communications networks.

The specific data is subject to PDF, and the above content is for reference