R2D-1209/HP

Current - Output (Max):	111mA, 111mA
Size / Dimension:	0.60" L x 0.42" W x 0.35" H (15.2mm x 10.7mm x 9.0mm)
Package / Case:	10-SMD Module, 6 Leads
Mounting Type:	Surface Mount
Efficiency:	80%
Operating Temperature:	-40°C ~ 100°C
Features:	SCP
Applications:	ITE (Commercial), Medical
Voltage - Isolation:	3kV
Power (Watts):	2W
Series:	ECONOLINE R2D
Voltage - Output 3:	--
Voltage - Output 2:	-9V
Voltage - Output 1:	9V
Voltage - Input (Max):	13.2V
Voltage - Input (Min):	10.8V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC Converters enable the conversion of one DC voltage level to another, usually without changing the output frequency. This makes DC DC Converters useful in applications where a variable input voltage is necessary to run an application, or where direct current must be taken from a source of alternating current (AC). The R2D-1209/HP DC DC Converter is a device which can be used to achieve these goals.

Input and Output Power

The R2D-1209/HP is capable of converting DC voltages up to 37.5V down to 2.5V. It can also take an input of 37.5V and convert it up to 30V, which makes it suitable for a wide range of applications. The maximum output power is 15W, which is enough for an application to run a low power device or load.

Internal Components

The R2D-1209/HP consists of a series of transformers and other components, including voltage regulation circuitry. The voltage regulation circuitry is responsible for accurately converting the input voltage to the desired output voltage.The transformers of the R2D-1209/HP are housed in a thermal enclosure, which helps to minimize heat dissipation. The transformers are also rated for a peak current of 10A, which allows for reliable operation at higher power levels.

Internal Control

The R2D-1209/HP includes an internal control system which allows adjustable control of the output voltage. The control system is composed of switches, transistors, resistors, and capacitors. It is used to control the output voltage by adjusting the duty cycle of the internal oscillator. This can be done manually, or by using external programming devices.

Operation

The R2D-1209/HP works by using an oscillating system of alternating current and direct current which are used to switch the output voltage from the input voltage. When the oscillator is turned on, the input voltage is converted to an alternating current which is then converted to the desired output voltage. When the oscillator is then turned off, the converters switches the output voltage back to the input voltage.

Other Considerations

The R2D-1209/HP is also designed to reduce production of EMI (electromagnetic interference) and RFI (radio frequency interference). This ensures that the device can be operated in close proximity to other electronic devices without interference. The device also includes a soft start feature which helps to protect the device against short circuit conditions.In conclusion, the R2D-1209/HP is an effective device for converting DC voltages from one level to another. Its internal control system allows for adjustable control of its output voltage, and its protection features make it suitable for a broad range of applications.

The specific data is subject to PDF, and the above content is for reference