R2D-1212/H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are an important class of electronic devices used to convert a direct current (DC) from one voltage level to another. Their applications range from providing power to computers, medical equipment, and consumer electronics, to providing energy storage for solar photovoltaic systems and electric vehicles.

The R2D-1212/H is a series of DC to DC buck (step-down) converters that convert an input voltage of 4.75 to 25 volts to a regulated output voltage ranging from 0.8 to 17 volts. It is available in models with maximum output currents between 1 and 2.5 amperes. The R2D-1212/H is a popular piece of equipment due to its high efficiency, small size, and overall affordability.

The working principle of the R2D-1212/H is relatively simple. In a basic buck converter, the input voltage is applied to a switch, usually a Field Effect Transistor (FET). When the switch is open, energy is accumulated in an inductor in the form of a magnetic field. When the switch is closed, the stored energy is discharged into a load, usually a capacitor, where it is then converted into the output voltage. The switch is opened and closed at a rate determined by the output voltage requirement. This is done by either the internal pulse-width modulation (PWM) controller, or by an external signal.

The R2D-1212/H is designed for applications that require adjustable or variable output voltage, as well as applications that require a transient response. It is commonly used in communication base stations, industrial control systems, and embedded systems.

The R2D-1212/H is engineered to have a low ripple and high efficiency. The primary components in the R2D-1212/H are the switch, inductor, and the output capacitor. The internal PWM controller and output voltage and current protection circuits makes the R2D-1212/H a complete, integrated solution for DC to DC conversion.

The R2D-1212/H features two operating modes; continuous conduction mode (CCM) and discontinuous conduction mode (DCM). CCM is the most efficient of the two, and is suitable for applications with high loads. DCM is more suitable for low load applications, as it has less power dissipation and consumes less power. The R2D-1212/H also includes an adjustable soft-start function, current limiting (CL), and short-circuit protection (SCP), protecting both the input and output.

The R2D-1212/H is a robust DC to DC buck converter that provides regulated output voltage from an input voltage range of 4.75 to 25 volts. Its high efficiency and small size make it an ideal solution for a variety of applications such as communication base stations, industrial control systems, and embedded systems. Its adjustable soft-start function, current limiting, and short-circuit protection make it a complete, integrated DC to DC conversion solution.

The specific data is subject to PDF, and the above content is for reference