RAD.0S.650.CTM

Style:	Straight
Mating Cycles:	--
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Center Contact Material:	--
Body Finish:	Chrome
Body Material:	Brass
Features:	--
Center Contact Plating:	Gold
Ingress Protection:	IP50 - Dust Protected
Fastening Type:	Push-Pull, Push-Pull
Mounting Feature:	Bulkhead
Mounting Type:	Panel Mount
Series:	--
Impedance:	50 Ohm
Convert To (Adapter End):	NIM-CAMAC CD/N 549 Jack, Female Socket
Convert From (Adapter End):	NIM-CAMAC CD/N 549 Jack, Female Socket
Center Gender:	Female to Female
Adapter Series:	NIM-CAMAC CD/N 549 to NIM-CAMAC CD/N 549
Conversion Type:	Same Series
Adapter Type:	Jack to Jack
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Overview

The RAD.0S.650.CTM axial connector is an isolated adapter designed for radio frequency (RF) applications, allowing its user to connect two different types of RF connectors. The adapter also provides superior impedance stability and isolation, and can be used in a wide range of RF-related applications. This article explains the basic principles of the RAD.0S.650.CTM coaxial connector, its working principle, and its typical applications.

Principles of Operation

The RAD.0S.650.CTM connector is an axial adapter designed to allow for the connection of two different types of RF connectors. This isolation ensures that there is no cross-talk between the two devices, and guarantees that the signals sent and received remain unaffected by other outside influences.The design of the RAD.0S.650.CTM consists of an outer housing, which has two identical connectors that are threaded onto the corresponding pins. The pins are held in place by a center core and a pinion, which is held in place by a locknut. The two connectors are then sealed to ensure complete electrical isolation.The center core is made of an insulating material such as ceramic or aluminum. This material provides protection from electrical interference and also ensures that no signal will be lost due to leakage or crosstalk. The pinion, which is made from stainless steel, is designed to keep the pins securely in place and prevent any accidental disconnections. The locknut is designed to ensure that the connectors are held securely in place while allowing the connectors to be tightened as needed.The RAD.0S.650.CTM is a low-loss adapter and is designed to have a 50 ohm impedance, allowing for superior signal transmission between connected devices. This superior impedance stability also provides the capability of higher frequencies without introducing any degrading distortion.

Typical Applications

The RAD.0S.650.CTM adapter is most commonly used in a variety of radio frequency applications, including wireless networking, cellular transmission systems, satellite communication systems, broadcast systems, digital television systems, and high frequency (HF) communication systems. It is also used in instrumentation applications, such as antenna testing and calibration.The RAD.0S.650.CTM is designed to be a versatile adapter suitable for a variety of applications. Its ability to connect two different types of RF connectors makes it a viable solution for a range of RF applications. Additionally, its superior impedance stability and isolation make it an ideal choice for a variety of RF transmission systems.

Conclusion

The RAD.0S.650.CTM adapter is an axial connector designed for use in radio frequency applications, specifically for connecting two types of RF connectors. This adapter also has superior impedance stability and isolation, making it an excellent choice for a variety of radio frequency transmission systems. Additionally, the adapter is designed to be versatile, allowing for use in a range of radio frequency applications.

The specific data is subject to PDF, and the above content is for reference