RAVF164DFT91K0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks, such as the RAVF164DFT91K0, are used in various types of electronic devices to reduce the voltage or current in a certain part of an electronic circuit. The network consists of several resistors that are connected together, and the resistors have different electrical characteristics that can be tailored to the specific requirements of the application. In the case of the RAVF164DFT91K0, it is specifically designed for use in military radios.

The RAVF164DFT91K0 is a resistor network array that uses a multi-segment capacitor divider network. These networks are used to reduce the voltage or current in the power supply of a specific radio circuit. The core of this component is a four-layer, three-dimensionally interconnected resistor network. It features eleven resistors that are interconnected across different dielectric thin-film layers. The configuration of the resistors and their wiring are balanced in such a way that it yields a very low-impedance (< 1 ohm), low-current (< 10 mA) power supply for the radio circuit.

The RAVF164DFT91K0 can be found in military radio applications and other sensitive equipment. It has a low-noise, high-performance capacitor-divider network which provides low-noise and high-impedance isolation for the device. The network is designed to resist electrical and thermal noise and offers high-frequency signal shielding. It is designed to be used in military radios, allowing long-distance communication without interference from other sources.

The working principle of the RAVF164DFT91K0 is based on the concept of dividing up the voltage and current in a circuit. The eleven resistors divide up and reduce the voltage by dividing up the current so that the radio can operate without overpowering the radio\'s internal components. The resistor network is also designed to eliminate any power drain that could come from external sources. The resistor network provides very low pass-band ripple, which increases the signal-to-noise ratio of the radio.

The RAVF164DFT91K0 is a reliable and cost-effective way to supply low-current, low-voltage power for sensitive radio circuits. The capacitor-divider network provides electrical and thermal noise reduction and excellent shielding for the device. It is designed to be used in military radios, providing long-distance communication without interference from other sources.

The specific data is subject to PDF, and the above content is for reference