RB-0512D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters are devices used to convert an input voltage or current into a different output voltage or current as required. They provide power for small systems, and can be used to provide isolation or convert from one voltage level to another. The RB-0512D is a DC DC Converter designed for use in various applications. This converter operates at an input voltage of 3.8V-5.5V and supplies an adjustable output voltage between 0.4V~3.3V. It also offers a wide range of operating frequency from 50KHz to 500KHz and provides low ripple noise up to 200mV.

The RB-0512D primarily uses a buck-boost regulator topology. When the input voltage exceeds the output voltage, the converter operates in buck mode and the output is generated from a two phase control oscillator. In this mode, the input voltage is converted to a lower output voltage through a series of pulses. The output voltage is then regulated by adjusting the widths and number of pulses of the two phases control oscillator.

When the input voltage is lower than the output voltage, the converter operates in boost mode. The buck topology used in the converter is changed to a pulse-width-modulated boost (PWM) regulator. In the boost mode, the voltage is generated by a current mode loop oscillator. This oscillator provides a pulse-width-modulated signal to run the FETs in the circuit which helps to create a high voltage output voltage.

The RB-0512D also includes a built-in over current, over temperature and short circuit protection features. These features ensure safe and resistant operation in severe environments. Moreover, the RB-0512D is designed with the Turbo Transformer technology which is used to maintain high efficiency despite wide input and output voltage ranges. This feature also helps to lower the input current so that the device can efficiently operate in low power applications.

In conclusion, the RB-0512D is an all-in-one converter unit with a wide range of input and output voltage levels. It is designed with the Turbo Transformer to maintain high efficiency even in low power applications and includes various protection features. This converter is suitable for use in various applications that require an adjustable output voltage between 0.4V-3.3V with low ripple noise.

The specific data is subject to PDF, and the above content is for reference