RBM-0505D/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are used to power electrical applications using direct current from the input source, such as batteries, solar cells, and more, and produce a source of direct current. The most common types of DC-DC converters are linear, buck, boost, and buck-boost converters. The RBM-0505D/P is a type of buck regulator DC-DC converter that is a highly efficient and relatively low-cost solution for most applications.

RBM-0505D/P Application Field

The RBM-0505D/P DC-DC converter has a wide range of applications, including industrial automation, telecommunication, medical equipment, consumer electronics, automotive, and other power conversion uses. It has a wide input voltage range of 3.13-36V, so it may be used for powering all kinds of circuits with different voltages. The converter also has a wide range of output options, such as 0.5V to 30V, and output current options ranging from 3A to 5A, so it can be used for a wide variety of applications and devices.

RBM-0505D/P Working Principle

The RBM-0505D/P is a buck converter, which means it takes the input direct current (DC) from a source and converts it into a lower direct current. The converter can be operated in different modes, depending on the desired output. In Constant Voltage Mode (CV), the output voltage is maintained at the desired level regardless of changes in load. In Constant Current Mode (CC), the output is limited to the desired current level by controlling the on-time of the power switch. The buck regulator is then able to maintain the output current at the desired level.

The RBM-0505D/P is powered by a switch mode regulator, which converts the input DC power to a variable-frequency AC signal. This AC signal is then converted back to a DC output voltage through a series of inductors and capacitors. The operating frequency of the buck regulator is determined by the ramp signals generated by its internal timer, which is dependent on the output voltage and the on/off times of the switch.

The RBM-0505D/P is also equipped with an inbuilt EMI filter that is designed to reduce electromagnetic interference. It further features a wide range of programming parameters, including output voltage, on/off delay, output voltage rise time, and others. All of these programmable parameters are set via a resistor divider connected to the converter’s control pins.

Conclusion

The RBM-0505D/P buck regulator DC-DC converter is a reliable and cost-efficient solution for many applications, including industrial automation, telecommunication, medical equipment, and others. It features a wide input voltage range and output options, as well as a series of programmable parameters to tune the performance of the converter to the application. It is also equipped with an inbuilt EMI filter to reduce electromagnetic interference. Therefore, it is a reliable and efficient solution for most DC-DC conversion applications.

The specific data is subject to PDF, and the above content is for reference