Allicdata Part #: | 237-1176-ND |
Manufacturer Part#: |
RC-11 |
Price: | $ 2.71 |
Product Category: | Inductors, Coils, Chokes |
Manufacturer: | Triad Magnetics |
Short Description: | FIXED IND 75UH 2.5A 70 MOHM TH |
More Detail: | 75µH Unshielded Wirewound Inductor 2.5A 70 mOhm Ra... |
DataSheet: | RC-11 Datasheet/PDF |
Quantity: | 333 |
1 +: | $ 2.46330 |
10 +: | $ 2.25729 |
100 +: | $ 1.47748 |
500 +: | $ 1.31333 |
1000 +: | $ 1.23124 |
2500 +: | $ 1.19020 |
DC Resistance (DCR): | 70 mOhm |
Height - Seated (Max): | 0.930" (23.62mm) |
Size / Dimension: | 0.600" Dia (15.24mm) |
Supplier Device Package: | -- |
Package / Case: | Radial |
Mounting Type: | Through Hole |
Inductance Frequency - Test: | 10kHz |
Operating Temperature: | -- |
Ratings: | -- |
Frequency - Self Resonant: | -- |
Q @ Freq: | -- |
Series: | RC |
Shielding: | Unshielded |
Current - Saturation: | -- |
Current Rating: | 2.5A |
Tolerance: | ±10% |
Inductance: | 75µH |
Material - Core: | Ferrite |
Type: | Wirewound |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RC-11 is a type of fixed inductor, which is commonly used in electronic circuits. It is one of the most popular types of inductors for a variety of applications, including radio frequency (RF) circuits, power supplies, and motor control circuits. The RC-11 inductor is relatively small, highly reliable, and can be used in a wide variety of circuit configurations.
The RC-11 inductor is also known as a ferrite-core inductor as it consists of a ferrite core and two windings of copper wire. The two windings are usually wound in the same direction in order to produce inductance. The inductor is then immersed in an epoxy resin to increase its reliability. The main advantages of RC-11 inductors are their small size, high reliability, and low cost.
The RC-11 inductor is commonly used in RF circuits such as VHF (Very High Frequency) and UHF (Ultra High Frequency) applications. It is also often used in power supply circuits and motor control circuits. It is a reliable and low-cost component that can be used to filter out or attenuate unwanted signals, such as noise or electrical interference. In addition, the small size of the RC-11 inductor makes it suitable for applications where a large size is undesirable or simply not possible.
The working principle of the RC-11 inductor is relatively simple. In an electrical circuit, an inductor stores energy in the form of a magnetic field. This is done by winding a coil of wire around a ferrite core. This creates an inductance that can be used to store electrical energy. As current is applied to the coil, the magnetic field stores energy and induces a voltage across the coil which can be used to power other components in the circuit.
The RC-11 inductor is used in a variety of applications due to its small size, high reliability, and low cost. It is commonly used in RF circuits, power supplies, and motor control circuits. It has a simple working principle and can store electrical energy in the form of a magnetic field. This makes it an ideal choice for a wide variety of applications.
The specific data is subject to PDF, and the above content is for reference
FIXED IND 10UH 590MA 350 MOHM10H Unshiel...
FIXED IND 22NH 1.4A 70 MOHM SMD22nH Unsh...
FIXED IND 13NH 600MA SMD13nH Unshielded ...
FIXED IND 680UH 210MA 4.6 OHM680H Unshie...
FIXED IND 470UH 1.3A 280 MOHM TH470H Uns...
FIXED IND 8.2UH 165MA 2.2 OHM TH8.2H Uns...