RC14JA68R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as the RC14JA68R0, are components used to control the flow of current in an electronic circuit. The RC14JA68R0 is commonly used to reduce voltage and current levels in very low power or low speed applications.

The most common application of a through hole resistor is in power supply circuits. It is used to limit the amount of current that flows through the circuit. This helps to ensure that no device becomes overloaded and that the circuit operates properly. It is also used to provide feedback and regulation to an amplifier or electronic signal over a specific frequency range.

The RC14JA68R0 is a type of linear, throughhole resistor and is available with various resistance values. This type of resistor uses an oxide coated resistor array that is encased in an epoxy body with terminals ready for connection to the circuit. It is available in increments of 1 to 60 ohms, but may be manufactured with custom resistance values, depending on the application. The resistor has a tolerance rating of +/-5%, which allows it to maintain an accurate resistance over its rated range.

The working principle of a through hole resistor is that it limits the amount of current passing through the circuit. It does this by using electrical resistance, which is caused by the material inside the resistor. This material can be one of two things; the first is a ceramic disk, and the second is a metal film. Depending on the type of material used, the resistor will have different characteristics and resistances.

When the resistor is connected to the circuit, the current flows through it. The current is then converted into heat energy as the electrons flow through the resistor, generating a voltage drop. The amount of voltage drop is proportional to the amount of current that is flowing through the resistor and this is determined by the amount of resistance of the resistor.

By controlling the resistance of the resistor, it is possible to control the amount of current that flows through the circuit. This allows the circuits to be properly designed and the current flow to be managed correctly. The resistor also helps to reduce the noise level in the circuit, as it is designed to limit the voltage and current levels.

In conclusion, the RC14JA68R0 is a through hole resistor that is commonly used to reduce voltage and current levels, and to limit the flow of current in the circuit. It is available in increments of 1 to 60 ohms, and it uses electrical resistance to influence the voltage and current in the circuit. This allows the circuits to be properly designed for their application and the current flow to be managed correctly.

The specific data is subject to PDF, and the above content is for reference