RCD-24-1.00/W/X3

Dimming:	Analog, PWM
Weight:	0.015 lb (6.8g)
Approvals:	cULus
Mounting Type:	Chassis Mount
Size / Dimension:	0.87" L x 0.49" W x 0.33" H (22.1mm x 12.6mm x 8.5mm)
Termination Style:	Wire Leads
Efficiency:	96%
Operating Temperature:	-40°C ~ 71°C
Ratings:	IP67
Features:	Remote On/Off, SCP
Series:	LIGHTLINE RCD-24
Power (Watts):	31W
Current - Output (Max):	1A
Voltage - Output:	3 ~ 31 V
Voltage - Input (Max):	36V
Voltage - Input (Min):	6V
Number of Outputs:	1
Topology:	Buck
Type:	Constant Current
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LED drivers are electronic devices used for powering light emitting diodes (LEDs). They are designed to provide an efficient and consistent source of power to the LEDs, as well as to protect them from damage. One such LED driver is the RCD-24-1.00/W/X3. This particular driver is designed to meet the high power requirements needed for driving high output LED lighting applications.The RCD-24-1.00/W/X3 is a high performance, low voltage LED driver. It is designed for use in both indoor and outdoor applications, and is suitable for a wide range of LED applications, including wall packs, street lights, and architectural lighting. The device can drive LEDs with a wide range of input voltages, from 10-54V. It is also capable of supplying up to 600mA of current to each LED, allowing it to power large numbers of LEDs in a single system.The RCD-24-1.00/W/X3 is capable of operating in both constant-voltage and constant-current modes. When operated in constant-voltage mode, it can be used to drive LEDs with a range of forward voltages. The device can also be used in constant-current mode, in which it can supply a steady current to the LEDs, despite fluctuations in LED characteristics and input voltage. This allows the LEDs to be accurately and reliably operated at their optimal performance level.In addition to its output capabilities, the RCD-24-1.00/W/X3 has built-in safety features to protect against damage due to over-current and over-voltage conditions. To achieve this, the device has an adjustable over-current and over-voltage protection system, which can be set to trip at specific thresholds. The device is also protected against short-circuits and reverse polarity, ensuring that it will not be damaged if these events occur.The RCD-24-1.00/W/X3 has a wide variety of features which make it an ideal choice for high output LED lighting applications. It has an adjustable output voltage range allowing for increased brightness or dimming capabilities, as well as adjustable output current to ensure optimal performance levels. With its adjustable over-current and over-voltage protection systems, the device is also designed to provide reliable operation in demanding conditions. Additionally, its wide voltage range and high current output make it suitable for a wide range of LED applications.

The specific data is subject to PDF, and the above content is for reference