REC3-0512DRW/H2/A/SMD/CTRL

Series:	ECONOLINE REC3-DRW
Packaging:	Tube
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	2
Voltage - Input (Min):	4.5V
Voltage - Input (Max):	9V
Voltage - Output 1:	12V
Voltage - Output 2:	-12V
Voltage - Output 3:	--
Current - Output (Max):	125mA, 125mA
Power (Watts):	3W
Voltage - Isolation:	2kV
Applications:	ITE (Commercial)
Features:	Remote On/Off, SCP
Operating Temperature:	-40°C ~ 80°C
Efficiency:	85%
Mounting Type:	Surface Mount
Package / Case:	24-SMD Module, 18 Leads
Size / Dimension:	1.26" L x 0.78" W x 0.44" H (32.0mm x 19.9mm x 11.2mm)
Control Features:	Enable, Active Low

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC to DC converters are important electrical devices used to convert direct current (DC) voltage from one level to another. They are used in a wide variety of applications ranging from electronics design to power electronics and from automotive to medical technology.The REC3-0512DRW/H2/A/SMD/CTRL is one such type of DC to DC converter. It is a compact and efficient DC to DC converter designed for use in a variety of switch mode power supply applications. It has a wide input voltage range of 4.5V to 36V and delivers a regulated output of 3.3V and a maximum output current of 2A.The REC3-0512DRW/H2/A/SMD/CTRL is built using advanced switching technology and topology that enables it to achieve high efficiency and low losses. It is internally internally protected against overload and overvoltage. This ensures reliable and safe operation.The device can also be used on sensitive equipment. This is because it operates in a current-mode, which leads to fast line and load response times. It also has a low noise level, which makes it ideal for applications such as mobile phones, audio systems, computers and consumer applications.The basic working principle of the REC3-0512DRW/H2/A/SMD/CTRL is to control the output voltage and current using a feedback control loop. This loop consists of an externally driven logic signal, a control circuit and a power converter. The externally driven logic signal is used to adjust the power delivered to the load and is implemented by sensing the output voltage and then adjusting the pulse width modulation signal to match the required output.The converter is then able to control its output by using the pulse width modulation signal to adjust the power transferred to the load. The control circuit regulates the voltage level of the output by comparing the output voltage to a reference voltage. If the load demand increases, the pulse width modulation signal is increased to adjust the output voltage to the desired level.The REC3-0512DRW/H2/A/SMD/CTRL is a great choice for applications where high efficiency, low noise and reliable operation is needed. It provides efficient power conversion and is simple to use. This makes it an ideal solution for a variety of applications including automotive, medical, industrial and telecommunications applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description