REC3-123.3SRW/H2/A/M/SMD/CTRL-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are used in numerous applications to convert DC input into an output of the desired voltage level. The REC3-123.3SRW/H2/A/M/SMD/CTRL-R converter is a commonly used DC-DC converter, allowing users to convert a DC input between 4.5 and 10 V to adjustable output voltage between 0.5 to 5 V.

The REC3-123.3SRW/H2/A/M/SMD/CTRL-R converter is a step-down, easy-to-use device. Its wide input voltage and output adjustable voltage make it an ideal power conversion solution for various system applications, such as charging MCUs, driving LED or powering regulated voltage rails for other control circuitry. Its surface mount design is also beneficial, allowing for easier integration into end-products.

The REC3-123.3SRW/H2/A/M/SMD/CTRL-R converter runs on constant frequency with an operating frequency of 300 kHz. It also has a maximum efficiency rating of 95%. It utilizes synchronous rectification, allowing it to provide a much higher efficiency compared to traditional Schottky diode rectifiers used in conventional converters. The REC3-123.3SRW/H2/A/M/SMD/CTRL-R converter also has a wide range of temperature operating capabilities, ranging from -40 to +85C.

The REC3-123.3SRW/H2/A/M/SMD/CTRL-R converter works by converting the input voltage into an alternating current (AC) signal through a power switch, then converting it back into a DC signal with a Schottky diode. This type of converter is known as a buck converter, and it is used to reduce the output voltage. The power switch is connected between the input voltage and the load to create a circuit that can be rapidly switched between on and off states. This allows the AC signal to be sent to the load and the output voltage to be adjusted. The Schottky diode is connected to the power switch in order to ensure the correct polarity of the AC signal.

The REC3-123.3SRW/H2/A/M/SMD/CTRL-R converter is also equipped with an integrated PWM controller, which can be used to adjust the output voltage. The PWM controller works by adjusting the average input voltage, thereby regulating the output voltage. The PWM controller can be programmed to adjust the output voltage in order to meet the desired load requirements. The REC3-123.3SRW/H2/A/M/SMD/CTRL-R converter is also equipped with over and under voltage protection and over temperature protection.

DC-DC converters are essential components in the circuit board of modern electronic systems. The REC3-123.3SRW/H2/A/M/SMD/CTRL-R converter is an ideal power conversion solution for many applications, offering regulated output voltage, high efficiency, and easy integration into system designs. Its wide operating temperature and voltage specifications make it suitable for operations in wide variety of industrial and automotive environments.

The specific data is subject to PDF, and the above content is for reference