REC3-2409DRWZ/H4/C/SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are generally used to convert the Direct Current (DC) input from either a battery or a solar panel, to a higher or lower voltage level. The most well known type of DC DC converter is the Buck-Boost converter; this type of converter is capable of regulating the output voltage to a level which is either higher or lower than the input voltage, depending on the application.

REC3-2409DRWZ/H4/C/SMD is an example of a DC DC converter designed for both off-grid and on-grid applications. This type of converter is designed to be used in a variety of applications ranging from high voltage and current applications to low volt-amp (VA) applications. It is a four-stage Buck-Boost converter, meaning that it has four main components: a Rectifier, an Inductor, a Capacitor, and a Regulator.

The primary application field for the REC3-2409DRWZ/H4/C/SMD is for on-grid applications. It is designed to take the DC input from either a battery or a solar panel, and then convert it to the specified output voltage. For example, if the input voltage is 24V, then the converter can be adjusted to output either 12V or 18V. This type of converter is capable of producing output currents of up to 3A, and its maximum operating temperature is 70°C.

The main advantage of this type of converter is that it is very efficient; with a high efficiency rate of up to 97%, it is able to convert most of the input power into usable output power. Additionally, the converter has a high level of safety; it can withstand a wide range of environmental conditions, and is resistant to shocks and vibrations.

The working principle of the REC3-2409DRWZ/H4/C/SMD converter is quite simple. It works in four stages: the rectifying stage, the inversion stage, the regulating stage, and the protection stage. In the rectifying stage, the incoming DC voltage is converted from AC to DC by a rectifier. In the inversion stage, the rectified voltage is inverted to produce the desired output voltage. In the regulating stage, the output voltage is regulated and controlled by a voltage regulator, which ensures that the output voltage stays at the correct level. In the protection stage, the converter is protected from overvoltage and undervoltage conditions.

Overall, the REC3-2409DRWZ/H4/C/SMD is an excellent choice for both on-grid and off-grid applications. It is capable of providing high efficiency rates and has a high degree of safety, making it well-suited for a variety of applications. It is also easy to install and is able to produce output currents of up to 3A.

The specific data is subject to PDF, and the above content is for reference