REC3-4815DRWZ/H2/C/M/SMD-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electrical circuits or equipment used to convert a DC voltage source from one voltage to another. For example, a converter might take a source voltage of 48V and convert it to 12V for the purpose of powering a device. In this application, the REC3-4815DRWZ/H2/C/M/SMD-R is an ideal choice.

The REC3-4815DRWZ/H2/C/M/SMD-R is a Sync Buck (step-down) DC-DC converter that uses synchronous rectification for improved efficiency compared to traditional linear regulation. It is designed to provide a 48V input and a 15.2V output, with an adjustable output voltage range of 6-18V. It has a wide continuous current range of 0-8A, and is also capable of handling up to 15A in pulses. The REC3-4815DRWZ/H2/C/M/SMD-R is also capable of supporting a power factor correction system, which significantly increases efficiency when dealing with higher input currents.

The REC3-4815DRWZ/H2/C/M/SMD-R has a wide operating temperature range, from -40°C to +105°C. This makes it suitable for a variety of applications, including industrial automation, energy storage, telecommunications, and robotics. The converter also features adjustable current limit, adjustable soft start, and adjustable frequency which allows for better stability and control. It also features a comprehensive protection system to protect the converter against over-voltage, over-current, and short circuit conditions.

The working principle of the REC3-4815DRWZ/H2/C/M/SMD-R primarily consists of two stages. The first stage takes the input voltage and depending on the duty cycle of the switching device, rectifies it to a steady DC voltage. The second stage then uses this rectified DC voltage to drive a power stage, which outputs the desired output voltage.

The power stage consists of the primary and secondary windings of the transformer, the switching device, and the synchronous rectifier. The primary winding is connected to the input voltage while the secondary winding is connected to the switching device. The switching device is then used to control the voltage on the secondary winding, thus controlling the output voltage on the secondary side. Finally, the synchronous rectifier is then used to rectify the AC voltage on the secondary side to a clean DC voltage.

Overall, the REC3-4815DRWZ/H2/C/M/SMD-R is an ideal choice for DC-DC conversion, providing improved efficiency, wide temperature range operation, adjustable current limit, adjustable soft start, and adjustable frequency for better stability and control. It is suitable for a wide variety of applications, from industrial automation to telecommunications.

The specific data is subject to PDF, and the above content is for reference