REC5-1209DRW/H6/A/M/CTRL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are electronic circuits designed to convert a direct current (DC) voltage from one level to another to allow for the transfer of electrical power from one device to another. This type of converter is widely used in the electronics industry due to its versatility, efficiency, and reliability. The REC5-1209DRW/H6/A/M/CTRL is one such example of a DC-DC converter, designed for linear regulation applications.

The REC5-1209DRW/H6/A/M/CTRL is a dc-dc controller designed for use in step-up/step-down topology applications. It is a highly integrated single-switch controller with advanced features to provide maximum flexibility and control for high efficiency design. The integrated package consists of two stages: an error amplifier and an internal N-MOS driver. The driver performs switching according to the analog control signals received from the signal pins. Such combination of architecture and design features enable the converter to achieve up to 96% efficiency.

The REC5-1209DRW/H6/A/M/CTRL is designed for use in a variety of applications such as battery-operated devices, vehicle/boat/airplane/machine/laptop chargers, lighting systems, industrial automation, and other distributed power systems. It has the capability to work with a wide input-voltage range (2.5V to 28V) and can produce up to 2A of current. The controller is also capable of providing precise process control for system-level power supply and accuracy for the whole application.

The main principle of the REC5-1209DRW/H6/A/M/CTRL is to convert a DC voltage into a different DC voltage signal used to drive electrical components. The efficiency and performance of the converter is dependent on its topology. In the case of the REC5-1209DRW/H6/A/M/CTRL, it utilizes a step-up/step-down technique to convert the input DC voltage to the desired output. This technique, also known as buck-boost, is the most efficient way to obtain the desired output voltage level. It works by controlling the current flow through the power switch to provide the desired output voltage signal.

Throughout the conversion process, the controller is able to monitor the output and correct the input voltage in order to maintain a constant output. This is accomplished by using a voltage divider to measure the output voltage and feeding the result back to the controller. The controller then compares this reference voltage to its setpoint and uses the difference to adjust the duty cycle of the power switch accordingly. This ensures that the output voltage remains within close proximity of the setpoint despite variations in load or input voltage.

The REC5-1209DRW/H6/A/M/CTRL also features several features to ensure maximum safety and reliability. These include output over-current protections and a built-in maximum duty cycle limit to prevent over-voltage or under-voltage problems. There is also an adjustable soft-start feature to prevent large inrush currents during power-up. The controller also supports fast and accurate frequency control over a wide range, allowing for fast SET/RESET when needed.

In conclusion, the REC5-1209DRW/H6/A/M/CTRL is a highly integrated, high-efficiency dc-dc controller designed for linear regulation applications. It is capable of providing precise process control and accuracy while also allowing for maximum flexibility and control. With its superior performance, low heat dissipation, and reliability, the REC5-1209DRW/H6/A/M/CTRL is sure to become an invaluable addition to any power system.

The specific data is subject to PDF, and the above content is for reference