REC5-2405DRWZ/H2/C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Convereters are electronic devices designed to convert a voltage from one DC voltage to another, typically to produce a higher or lower voltage level. This type of device is typically used in applications where either the voltage or current in a circuit needs to be changed, or in cases where a device needs to be powered from a higher voltage than the source. In such cases, a DC-DC Converter is used to step down the voltage and make it compatible with the device’s circuitry. The REC5-2405DRWZ/H2/C is a type of DC-DC converter designed specifically for these types of applications.

The REC5-2405DRWZ/H2/C is a low cost DC-DC converter designed to provide a regulated output of 5V from a wide input voltage range of 6V to 16V. This means that the device can be used in a wide range of applications, such as powering a 5V logic circuit from a 9V battery or using a 6V solar panel to regulate the voltage to 5V. The device is available in two configurations: with and without the “C” designation. The “C” denotes the presence of an isolation barrier which blocks noise and common-mode AC signals from the input to the output.

The REC5-2405DRWZ/H2/C is an isolated DC-DC converter designed to provide high efficiency and low power dissipation in a small package. The device can handle up to 2A of current, and it has a wide operating temperature range of -40ºC to 85ºC. It also features a built-in overvoltage protection and short circuit protection. The device is available in two package types: DIP and SMD.

The REC5-2405DRWZ/H2/C can be used in a variety of applications, including motor and relay control, automotive electronics, portable devices, and medical equipment. The device is ideal for use in applications where a high voltage input is needed. It is typically used to step down the voltage from the input source to the correct output voltage level for powering a low voltage circuit. The device can also be used to convert a higher voltage into a lower voltage when an input from a 12V source is needed, for example.

The REC5-2405DRWZ/H2/C is a self-contained, non-synchronous DC-DC converter, meaning that it does not require an external clock. The device is internally controlled, meaning that all control is accomplished on the chip itself, without the need for external control elements. This greatly simplifies the design and reduces the cost of the system. The device operates in a continuous conduction mode, meaning that it switches on and off continually, at a frequency determined by the external components.

In terms of its operation, the REC5-2405DRWZ/H2/C works by turning energy from the input voltage into a higher voltage through the switching of power transistors. The input voltage is compared to an internal reference voltage, and when the voltage falls below the reference voltage, the power transistors are turned on and the output voltage is increased. When the input voltage rises above the reference voltage, the power transistors are turned off and the output voltage is reduced. This process repeats itself continually, regulating the output voltage to the desired level.

The REC5-2405DRWZ/H2/C is a high performance, cost-effective solution for a wide range of applications. The device is excellent for converting low input voltages to higher ones, as well as regulating higher voltage inputs to desired levels. The device is small, reliable and simple to use, making it easy to integrate into any system. With its high efficiency and low power dissipation, the REC5-2405DRWZ/H2/C is an ideal choice for powering various low voltage circuits.

The specific data is subject to PDF, and the above content is for reference