REC5-2412DRWZ/H2/A/SMD/CTRL-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic devices that accept a DC input voltage and produce a lower DC output voltage. They are used to feed power from one DC source to another location. REC5-2412DRWZ/H2/A/SMD/CTRL-R is a type of DC-DC converter that can accept an input of 5V-24V and provide an output current of 12A. It is available in either a through-hole or a surface mount package.

The REC5-2412DRWZ/H2/A/SMD/CTRL-R is intended to be used in applications where high-currents are required to be transferred from a power supply to a load, such as in automotive, telecommunications, consumer electronics, industrial and other applications where a regulated source is required. Its design allows for relatively low noise and ripple, as well as excellent load regulation.

The working principle of the REC5-2412DRWZ/H2/A/SMD/CTRL-R is based on the buck-boost converter topology. This topology provides isolation between the input and output, as well as voltage regulation and allows for low ripple and noise. It consists of an inductor, a diode, and a set of power transistors. The input to the converter is fed to the primary side of the transformer, and when the power switch is closed, the primary side will be energized. When the power switch is opened, the output is produced by the transformer secondary winding.

The power switch in the REC5-2412DRWZ/H2/A/SMD/CTRL-R is controlled by a control circuit which is responsible for switching the power switch on and off. The switching cycle can be adjusted by changing the control signal from the control circuit. The output voltage of the buck-boost converter is regulated by the duty cycle of the power switch which is determined by the control circuit. When the power switch closes, an inductor will store energy in the form of a magnetic field. This stored energy is then released to the load when the power switch turns off. The diode allows the current to flow in only one direction, from the input to the output, while blocking reverse current.

The REC5-2412DRWZ/H2/A/SMD/CTRL-R is designed to be used in high current applications and is suitable for most DC applications. It is exceedingly reliable and efficient and can provide regulated outputs over a wide range of input voltages. The design itself ensures very low noise and ripple, as well as excellent load regulation.

The specific data is subject to PDF, and the above content is for reference