REC7.5-2412SRW/H2/A/M/SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are power management devices which can convert DC electricity from one voltage level to another. The REC7.5-2412SRW/H2/A/M/SMD is a switching power supply which performs DC to DC voltage conversion. It is a simple and efficient solution for powering various electrical devices with different voltages.

The converter has a wide input range from 7.5V - 24V, so it can be used with almost any DC power source. It also has a wide output range of 12V- 24V, making it suitable for devices which require different output voltages. It is a high efficiency, low ripple and low cost switching power device which makes it suitable for a variety of applications.

The REC7.5-2412SRW/H2/A/M/SMD is most commonly used in industrial applications such as robotics, automation, medical and entertainment equipment, consumer electronics, and automotive electronics. It can also be used in home appliances, security systems, LED lighting, and more.

The REC7.5-2412SRW/H2/A/M/SMD uses a synchronous rectification technology known as buck-boost converter which is a combination of buck and boost mode. In this mode, the output voltage is determined by the input voltage and the duty cycle is controlled by an internal control loop. This gives the converter the ability to produce a constant output voltage even if the input voltage changes.

The REC7.5-2412SRW/H2/A/M/SMD has an internal MOSFET switch which is driven by a PWM controller. The MOSFET switch is connected to a rectifier bridge and an inductor. The rectifier bridge converts the input voltage into a DC voltage. The inductor then acts as a filter, storing energy and releasing it in a controlled manner. This enables the converter to produce a regulated output voltage.

The PWM controller regulates the switching frequency and the duty cycle of the MOSFET switch. The PWM controller also produces a feedback signal which is used by the control loop to adjust the duty cycle in response to changes in the input and output voltages. This feedback signal is then combined with the reference voltage signal and compared to the input voltage to ensure a constant output voltage in varying input voltages.

The REC7.5-2412SRW/H2/A/M/SMD also has an internal over-voltage protection circuit which can protect the device from any overload and over-voltage surges. The circuit senses the output voltage and shuts off the converter if it exceeds the rated output voltage.

The REC7.5-2412SRW/H2/A/M/SMD is a reliable and efficient switching power supply which can be used in a variety of applications. It is a low-cost, low-ripple, and high-efficiency device which makes it an ideal choice for powering various electrical devices. With its wide input and output ranges and its over-voltage protection circuit, the converter is a powerful and reliable solution.

The specific data is subject to PDF, and the above content is for reference