RER75F80R6RC02

Operating Temperature:	-55°C ~ 250°C
Failure Rate:	R (0.01%)
Package / Case:	Axial, Box
Lead Style:	Solder Lugs
Height - Seated (Max):	0.625" (15.87mm)
Size / Dimension:	1.968" L x 1.140" W (49.99mm x 28.96mm)
Mounting Feature:	Flanges
Coating, Housing Type:	Aluminum
Features:	Military, Moisture Resistant
Series:	Military, MIL-PRF-39009, RER75
Temperature Coefficient:	±20ppm/°C
Composition:	Wirewound
Power (Watts):	30W
Tolerance:	±1%
Resistance:	80.6 Ohms
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RER75F80R6RC02, part of the Chassis Mount Resistors family, is a cost effective capacitor and resistor combination suitable for applications when load and line readjustment is required. It is a single pole single throw type (SPST) switch and requires zero line voltage for operation.The RER75F80R6RC02 is designed to provide a wide range of load and line adjustability for most types of component installations. It is available in a wide range of mount types including Terminal Block or Screw Mount, and the resistance values can be adjusted up to 4.8k ohms with up to 5mm increments.At its most basic level the RER75F80R6RC02 is a simple three-wire device with a common (C) terminal, a load (L) terminal and a resistor (R) terminal. It is connected between the load (L) terminals and the resistor (R) terminal in such a way that it will effectively control the load, depending on the current going through it.The working principle behind this three wire device is that when current passes through the device, the C terminal is diverted from the L terminal to the R terminal. This will effectively create a lower voltage through the resistor element, adjusting the resistance of the device. As the current through the R terminal increases, the device will automatically adjust the voltage thus controlling the load.The RER75F80R6RC02 is particularly well suited to the automotive aftermarket, where it allows the installer to adjust the load and line values of the installation to suit the needs of the application. It is also a cost effective solution for applications which may require frequent readjustment of the voltage drop, such as in security or surveillance systems.The RER75F80R6RC02 is also now available with an extension lead for remote installation. This allows installation on extension cables, which can be used to carry out repairs and adjust the settings remotely. This feature is particularly useful for electricians working on motor vehicles or other hard to reach locations.The RER75F80R6RC02 is an ideal device for applications where line and load readjustment is necessary. It is a cost effective device and is available with a wide range of mounting options and adjustment options, making it a perfect choice for installations which require high level of readjustment and reliability. The ability to use an extension lead to remotely adjust the settings makes it even more useful for applications such as remote surveillance and automotive aftermarket applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description