RF062PJ103CS

Power Per Element:	31.25mW
Height - Seated (Max):	0.013" (0.33mm)
Size / Dimension:	0.032" L x 0.024" W (0.80mm x 0.60mm)
Supplier Device Package:	0603
Package / Case:	0302 (0805 Metric), Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±200ppm/°C
Series:	RF
Number of Pins:	4
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	2
Tolerance:	±5%
Resistance (Ohms):	10k
Circuit Type:	Isolated
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The RF062PJ103CS is a unique resistor network or array. It is one of the many components typically used in power systems, and it serves a pair of very important purposes. On the one hand, it acts as a current-limiting device, which makes it is critical in safety-critical situations. On the other hand, it supports the efficient transfer of electrical current.Before understanding what the RF062PJ103CS does, it\'s necessary to understand how standard resistor networks work. In its most basic form, a resistor network or array is a series of resistors connected in parallel and/or in series in order to achieve the desired result. In this case, the individual resistors are connected in parallel, so they can share the voltage across the network.In the case of the RF062PJ103CS, the network consists of three resistors with a single common leg. Specifically, it has an 82-ohm resistor, a 70-ohm resistor, and a 105-ohm resistor. This combination makes it ideal for applications where current-limiting and power redistribution are critical.The working principle of the RF062PJ103CS is actually quite simple. As mentioned, it\'s composed of three resistors connected in parallel. When current is applied, it will spread out evenly across all three resistors. This is because the resistance of the resistor array dictates how much current will flow through each individual resistor. The resistor array also establishes the total current of the circuit.By combining resistors of different values, the RF062PJ103CS can be used to limit the flow of current. This makes it suitable for safety-critical circuits, where an excessive flow of current could present a risk to the system. Since all three resistors are connected in parallel, the total current of the circuit is limited by the lowest value resistor. In the case of the RF062PJ103CS, this would be the 82-ohm resistor.Moreover, the resistor array also functions as an efficient current distributor. Since the voltage is distributed evenly across the resistor array, it can help evenly distribute power to multiple devices. This can be used to control motors, LEDs, and other components.Overall, the RF062PJ103CS is a unique resistor network or array that makes an important contribution to power systems. Its combination of resistors enables it to act as both a current-limiting device and an efficient current distributor. As a result, it can be used in safety-critical applications and power distribution applications alike, making it a valuable component in modern power circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description