RFM-7020-26-SMA-79

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RFM-7020-26-SMA-79 is a RF power dividers or splitters. It is designed as a two-way power divider and can be configured in any of the following four topologies. It is an ideal solution for applications where maximum RF power transmission is required and it can provide excellent performance over a broad range of frequencies since it offers up to 10 dB of isolation between ports.

RFM-7020-26-SMA-79 divides input power between two RF ports with a power distribution ratio of 1:9, 1:7, 1:5, or 1:3. It is designed in a die cast aluminum enclosure with SMA-79 connectors and is powered by an AC voltage. It is capable of providing up to 10 dB isolation between the two ports and features return loss of less than -20 dB at the port intersection points. The RF power divider provides excellent performance over a broad range of frequencies with a voltage standing wave ratio (VSWR) of less than 1.2:1.

The RFM-7020-26-SMA-79 is versatile and suitable for a variety of applications, such as antenna splitting, signal distribution, and RF power combining. It can be used in bases stations, point-to-point communication systems, and for other RF communication systems. The RF power divider’s performance is optimized for 50 Ω systems. To facilitate use in other systems, an impedance matching network should be employed.

The RFM-7020-26-SMA-79 RF power divider is a useful tool for dividing radio-frequency (RF) power into two or more signals. The divider is used in two-way systems or multi-way systems when uniform power distribution from an input signal is desired. It offers reasonable isolation between ports and power splitting accuracies of up to ±0.1 dB across the entire frequency range. The device provides excellent harmonic performance with harmonic suppression of -40 dBc.

The working principle of the RFM-7020-26-SMA-79 is based on the transfer of power from the input port to the two output ports. The two output signals are equal and will always have a standing wave ratio (SWR) of less than 1.2:1. This ensures maximum power transmission from the input to the output. The RF power divider is designed to provide a low insertion loss while maintaining high isolation between the ports. This allows for a highly efficient power transfer with minimal loss.

To ensure maximum performance, the RFM-7020-26-SMA-79 should be used in applications where accuracy, efficiency, and high power capabilities are required. It is suitable for a variety of applications, from base station antenna splitting to RF power combining and signal distribution. However, when using the divider in systems with impedance other than 50 Ω, an impedance matching network should be employed. This will ensure that the benefits of splitting the input power are fully realized.

The specific data is subject to PDF, and the above content is for reference