RGZ-241509D/HP

Current - Output (Max):	66mA, 111mA
Size / Dimension:	0.78" L x 0.39" W x 0.28" H (19.7mm x 10.0mm x 7.1mm)
Package / Case:	14-DIP Module, 6 Leads
Mounting Type:	Through Hole
Efficiency:	--
Operating Temperature:	-40°C ~ 85°C
Features:	SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	4kV
Power (Watts):	2W
Series:	ECONOLINE RGZ
Voltage - Output 3:	--
Voltage - Output 2:	-9V
Voltage - Output 1:	15V
Voltage - Input (Max):	26.4V
Voltage - Input (Min):	21.6V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters utilize the principle of Coulomb’s Law to convert a Direct Current (DC) power source into a higher voltage or current, either in the same or in a different form. DC DC converters provide efficient and reliable power transmission from the power supply to the load, enabling the load to operate optimally. The DC DC converter is an important component in a wide range of electronic applications – from power supplies used in consumer electronics, such as television sets, computers and home entertainment systems, to sophisticated medical devices, and industrial control systems. A DC DC converter is also known as a “step-up converter” because it can increase the voltage of a low voltage supply to a higher level.The RGZ-241509D/HP is a high-efficiency DC DC converter designed for industrial applications. It has a maximum input voltage of 24 VDC and the output voltage can be adjusted between 0.8-15 VDC, making it suitable for a wide range of applications. The RGZ-241509D/HP is a buck-boost type DC DC converter with maximum efficiency of 97.6%. The device features a built-in PFC-PWM controller that allows the converter to operate over a wide input voltage range with high efficiency and low standby power consumption. It has protection against over voltage, short circuit, and over-temperature and has a power-on pulse width modulation (PWM) mode for improved system efficiency.The RGZ-241509D/HP utilizes the Buck-Boost topology, which combines the basic principles from the Buck and Boost converters. This type of converter operates in two distinct modes:When the input voltage is higher than the output voltage, the circuit behaves like a Buck converter, which steps down the input voltage with high efficiency.When the input voltage is lower than the output voltage, the circuit behaves like a Boost converter, which steps up the input voltage and outputs the higher voltage.The advantage of the Buck-Boost topology is that it can provide a regulated output voltage regardless of the input voltage. This makes it ideal for industrial applications where the input power source may vary.The RGZ-241509D/HP uses a high-frequency full bridge PWM converter as the switching element. This switch is controlled by an internal PWM control circuit to regulate the output voltage. It works by comparing the measured output voltage with the reference voltage. Whenever the output voltage is lower than the reference voltage, the PWM control circuit sends a signal to the switching element to increase the duty cycle, which in turn increases the output voltage, and vice versa. The RGZ-241509D/HP also features a unique ‘Adaptive Duty Cycle’ design, which improves efficiency at light loads, as well as a built-in overtemperature protection circuit.The RGZ-241509D/HP is a high-efficiency and reliable DC-DC converter, suitable for a wide range of industrial applications from telecom and consumer electronics to medical and industrial control. Its wide input voltage range, high efficiency, low standby power consumption, and advanced protection features make it an ideal choice for the most demanding applications.

The specific data is subject to PDF, and the above content is for reference