RH-0509D/HP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are a type of power converter system that convert a direct current (DC) input into a DC output. A DC to DC converter consists of a transformer, rectifier, and an inverter. The transformer is used to step up or step down the voltage level according to user requirements and the inductor to filter the AC ripples. The rectifier is used to convert AC to DC, while the inverter changes the DC into the required voltages. Another key component used in a DC to DC converter is the filter capacitor, which smoothens the output voltage.

The RH-0509D/HP DC to DC converter is a non-isolated buck module with an output voltage of 24V and a maximum output current of 0.45A. The input voltage range is 1.8V to 10V. The temperature range -40°C to+85°C and the operating frequency range is 40Khz to 75Khz. The components required in the circuit are MOSFET, inductor, capacitor and diode. The MOSFET acts as a switch to control the current flow and the inductor is used to filter out the AC ripples arising from the output.

The working principle of the RH-0509D/HP DC to DC converter follows a two-stage process; firstly, a DC input is applied to the converter and is rectified by the rectifier which is made up of one diode. This rectified voltage is then filtered using a capacitor, it then goes to the input of the converter. The MOSFET acts as a switch and is used to control the switch which regulates the current flow. When the switch is in the ‘ON’ state, current flows across the inductor and is stored in the capacitor. When the switch is in the ‘OFF’ state, the current is reversed and flows back to the input through the MOSFET. This process continues thereby increasing the potential of the output voltage.

The RH-0509D/HP DC to DC converter is typically used as a voltage regulator to maintain a constant voltage or current level at the output. It is also used in residential solar energy systems, automotive electric power systems, and fuel cell systems. Additionally, the converter can also be used as an intermediate power source in power electronics, especially in voltage conversion applications such as wall wart and buck/boost converters.

In conclusion, the RH-0509D/HP DC to DC converter is a kind of non-isolated buck DC converter with an output voltage of 24V and a maximum output current of 0.45A. It is used primarily as a voltage regulator but also has applications in solar energy systems, automotive electric power systems and fuel cell systems. The converter works on the principle of controlling a current flow, rectifying the input voltage with the help of a diode, and storing the resultant current in a capacitor to increase the voltage level. DC to DC converters provide an efficient and cost-effective way of managing voltage levels.

The specific data is subject to PDF, and the above content is for reference