Allicdata Part #: | 945-1911-5-ND |
Manufacturer Part#: |
RH-0512D/H |
Price: | $ 5.26 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | RECOM Power |
Short Description: | DC DC CONVERTER +/-12V 1W |
More Detail: | Isolated Module DC DC Converter 2 Output 12V -12V ... |
DataSheet: | RH-0512D/H Datasheet/PDF |
Quantity: | 1000 |
25 +: | $ 4.78170 |
Current - Output (Max): | 42mA, 42mA |
Size / Dimension: | 0.77" L x 0.28" W x 0.40" H (19.7mm x 7.1mm x 10.2mm) |
Package / Case: | 7-SIP Module, 5 Leads |
Mounting Type: | Through Hole |
Efficiency: | 84% |
Operating Temperature: | -40°C ~ 90°C |
Features: | SCP |
Applications: | ITE (Commercial), Medical |
Voltage - Isolation: | 4kV |
Power (Watts): | 1W |
Series: | ECONOLINE RH |
Voltage - Output 3: | -- |
Voltage - Output 2: | -12V |
Voltage - Output 1: | 12V |
Voltage - Input (Max): | 5.5V |
Voltage - Input (Min): | 4.5V |
Number of Outputs: | 2 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electronic circuits that convert one Direct Current (DC) voltage level to another. They can be used to regulate voltage levels, for example to boost low voltage signals from a battery to the level of a more powerful voltage supply. The RH-0512D/H is one such device, designed for applications from 5 to 36V. It works by converting an incoming DC voltage from the input source, such as a battery, into a higher voltage at the output side of the circuit.
The RH-0512D/H is an optimized stepping voltage-converter power booster, whose wide range input is suitable for 130W continuous usage power supplies. It has an integrated power switch, fixed switching frequency, and active power factor correction circuit, and also supports low standby power consumption.
The device uses Synchronous Buck Boost technology, which is a combination of a DC-DC buck converter and a DC-DC boost converter. The buck converter can provide step-down voltage conversion from a higher input voltage to a lower output voltage. In contrast, the boost converter can provide step-up voltage conversion from a lower input voltage to a higher outpurt voltage. By combining the buck and boost modes into one circuit, the RH-0512D/H can provide a wide range of input and output voltages, with adjustable output voltage settings.
The output voltage of the RH-0512D/H can operate from 5 to 32V, while the input voltage can range from 4.5 to 36V. It is designed to handle up to 130W of continuous output power with a peak power rating of 270W. The device features a variable switching frequency in the range of 50 kHz to 1 MHz, with an adjustable switching frequency if necessary. It also has a maximum efficiency of 92%, and a no load input power of 300 mW.
The RH-0512D/H also features programmable soft-start, discharge and hiccup current limit, which allows for better control of current. It also has a built-in over-temperature protection circuit, allowing it to remain stable and safe in overheating environments. In addition, the device features a “load disconnect” (LD) pin that allows the output to be disabled if the output is not in use. This helps to reduce power consumption and noise.
The RH-0512D/H is suitable for a wide range of applications, including industry, consumer, medical, automotive, computers, communications, security, audio-visual, and industrial control systems. The device is user-friendly, allowing for ease of use and operation without requiring too much technical expertise. It is also cost effective and reliable, with a mean time between failures (MTBF) of more than one million hours.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...