RJHSEE08G

Shielding:	Unshielded
Operating Temperature:	-55°C ~ 85°C
Housing Material:	Thermoplastic
Contact Finish Thickness:	6.00µin (0.152µm)
Contact Finish:	Gold
Contact Material:	Phosphor Bronze
Tab Direction:	Up
Ingress Protection:	--
LED Color:	Green, Orange - Green, Orange
Features:	Board Lock
Ratings:	--
Series:	RJHSE
Termination:	Solder
Orientation:	90° Angle (Right)
Mounting Type:	Through Hole
Number of Rows:	1
Number of Ports:	1
Number of Positions/Contacts:	8p8c (RJ45, Ethernet)
Connector Type:	Jack
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Modular connectors, also known as jacks, are used in a wide variety of industrial applications to provide a secure, cost-effective way to link two electronic applications together. The RJHSEE08G, also known as the \'RJ45 Ethernet jack\', is a popular jack that is widely used in Ethernet and networking applications, thanks to its stable performance and wide compatibility.In this article, we\'ll explore the RJHSEE08G application field and working principle, explaining how to use and install this jack, as well as some common uses for the RJHSEE08G.

Applications and Specifications of RJHSEE08G

The RJHSEE08G is a type of 8P8C (8-pin 8-position) modular jack, typically used in Ethernet and networking applications. It offers a stable performance and is compliant with the IEEE 802.3 Ethernet standards. The jack has a padlock type connection with full-length shielding and features a low-profile design, making it suitable for higher density applications.It has a transmission rate of up to 1Gbps and supports 10/100/1000 Mbps Ethernet networking. The temperature operating range of the RJHSEE08G is -20°C to +80°C, which ensures reliable performance in a variety of environments. The jack features 7 8-core shielded pins and a single signal ground pin.

Working Principle of RJHSEE08G

When two electronic devices are connected via the RJHSEE08G jack, electrical signal flows between the two devices through an 8-core twisted pair cable.The twisted pair cable contains 4 pairs of wires, each with two different conductors. The shielded wires are used to transmit data, while the ground wire is used to shield against interference from outside sources. The 8 pairs of wires are arranged in a specific way so that the signal transmitted by one device can easily be received by the other.

Installation and Use of the RJHSEE08G

Installing the RJHSEE08G is relatively easy, although there are some key steps which must be followed. Firstly, ensure that the sink is clean; use a soft cloth to remove any dust, dirt, or grime. Connect the 8-core cable to the jack, making sure to orient the pins in the correct position. Place the protective cap on the jack and secure it with the included screws. Next, install the RJHSEE08G jack onto the panel, making sure to align the 4-hole pattern correctly. Secure the jack with the included screws and cover the panel with the protective cover. Finally, connect the other end of the cable to the target device.

Common Uses of the RJHSEE08G

The RJHSEE08G is a versatile jack that is widely used in a variety of applications. It is the standard in Ethernet and networking applications, but is also used in industrial automation and other field data transfer applications. It is also a popular choice for high density applications such as high-speed data transmission and Wi-Fi connections.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description