Allicdata Part #: | 255-2832-ND |
Manufacturer Part#: |
RK1-L2-12V |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | Panasonic Electric Works |
Short Description: | RELAY RF SPDT 10MA 12V |
More Detail: | N/A |
DataSheet: | RK1-L2-12V Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | 0.00000 |
Turn On Voltage (Max): | 9 VDC |
Coil Resistance: | 360 Ohms |
Coil Power: | 400 mW |
Contact Material: | -- |
Operating Temperature: | -40°C ~ 70°C |
Termination Style: | PC Pin |
Mounting Type: | Through Hole |
Features: | Sealed - Fully |
Release Time: | 6ms |
Operate Time: | 10ms |
Turn Off Voltage (Min): | -- |
Series: | RK |
Switching Voltage: | 30VDC - Max |
Contact Rating (Current): | 10mA |
Contact Form: | SPDT (1 Form C) |
Coil Voltage: | 12VDC |
Coil Current: | 33.3mA |
Coil Type: | Latching, Dual Coil |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Obsolete |
Lead Free Status / RoHS Status: | -- |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
High Frequency (RF) Relays are used in a wide range of applications. The RK1-L2-12V type of RF Relay is designed for low-voltage applications and is well suited for controlling AC signals. It also works well with DC signals and provides excellent isolation between the antenna and the controlled circuits.
This specific type of RF Relay has an on/off ratio of 110 dB, while its off-to-on response time is less than 5 ms, and the typical life cycles are estimated to be greater than 20 millions. Additionally, the power handling capability of this RF Relay is 12W, with an operating frequency of 0.5MHz to 5GHz.
The RK1-L2-12V RF Relay\'s working principle is based on a simple mechanical switch. This switch is activated by an RF voltage applied to the antenna terminals. This voltage creates an electric field, which in turn acts upon a pivoting armature. As the voltage increases, the armature is forced close to a set of two or more internal contacts, thus completing or interrupting the circuit.
The RK1-L2-12V RF Relay is used in a variety of applications such as measurements, servo control, and switching applications. Its ability to switch low to medium voltage AC circuits makes it well suited for antennas and other communication equipment. This RF Relay is also used in frequency-hopping spread spectrum (FHSS) radio systems, such as cell phone systems and wireless LANs.
The RK1-L2-12V type of RF Relay is also used in automotive applications. These include engine control systems, alternators, fuel systems, and air conditioning. It can be used to switch control signals for various actuators and sensors in order to regulate engine idle speed. There are also applications where it can be used as an amplifier switch in electronic control units (ECUs), and as a reset switch in power supply systems.
To sum up, the RK1-L2-12V RF Relay is a reliable and affordable device which provides excellent isolation between the antenna and the controlled circuits. It is widely used in a variety of applications requiring the switching of low- to medium-voltage AC signals. Its reliability and excellent on/off ratio make it a suitable choice for numerous applications.
The specific data is subject to PDF, and the above content is for reference
RELAY RF SPDT 10MA 3V
RELAY RF SPDT 10MA 5V
RELAY RF SPDT 10MA 12V
RELAY RF DPDT 1A 12V
RELAY RF DPDT 1A 5V
RELAY RF DPDT 1A 18V