RL20S101GR36

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most common components in electrical circuits, and are used to limit the amount of current flowing in circuits. The RL20S101GR36 is a resistor commonly used in many electronic applications. This article will focus on its applications and working principles.

The RL20S101GR36 is a through hole resistor with a resistance of 0.1 ohms and a tolerance of 1%. It has dimensions of 2.0 by 1.0 mm, and can be used in both low and high temperature applications. The voltage rating for this resistor is up to 350V.

The RL20S101GR36 is commonly used in low-voltage and high-voltage circuits, as well as in DC control applications. This resistor has a low thermal coefficient, which means it can maintain its resistance over a wide range of temperatures. This makes it ideal for high-temperature applications where stability is a key requirement.

The RL20S101GR36 can also be used in low-power and audio circuits where stability and low noise are required. In these applications, it can provide a low-noise signal level with a high signal-to-noise ratio, offering superior performance. This makes it ideal for a wide range of audio applications.

The working principle of the RL20S101GR36 is quite simple. It contains two conducting paths that cross in the middle, allowing electrons to pass freely from one side to the other. When the device is connected to a circuit, electricity passes from one side to the other, and a small amount of power is lost due to opposition from the resistor. This opposition, or resistance, is what allows the device to limit the current flowing through the circuit.

The RL20S101GR36 also has a higher power rating than many other resistors in the same size. The power dissipation rating for the RL20S101GR36 is 5 watts, meaning that it can handle more current than other similar resistors. This makes it suitable for high-power applications that require stability and reliability.

In conclusion, the RL20S101GR36 is a through hole resistor with a resistance of 0.1 ohms and a tolerance of 1%. It has a low thermal coefficient, is suitable for both high and low temperature applications, and can handle up to 5 watts of power. It is commonly used in audio and DC control applications, as well as in low-voltage and high-voltage circuits. The working principle of the RL20S101GR36 is based on the fact that two conducting paths in the middle of the device create resistance, allowing it to limit the current flowing through the circuit.

The specific data is subject to PDF, and the above content is for reference