RL3006-15.7K-155-D1

Series:	RL3006
Packaging:	Bulk
Part Status:	Active
Resistance in Ohms @ 25°C:	30k
Resistance Tolerance:	±10%
B Value Tolerance:	--
B0/50:	--
B25/50:	--
B25/75:	--
B25/85:	4783K
B25/100:	--
Operating Temperature:	-50°C ~ 150°C
Length - Lead Wire:	1.50" (38.00mm)
Mounting Type:	Through Hole
Package / Case:	Disc, 8.1mm Dia x 3.8mm W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Temperature Sensors - NTC Thermistors

NTC thermistors are temperature sensors that use the negative temperature coefficient (NTC) property of thermistors to convert temperature changes into a measurable electrical signal. The RL3006-15.7K-155-D1 thermistor is designed to measure temperature ranges from –40 °C to +125 °C with a nominal resistance of 15.7 KΩ at 25 °C. It features a fast response time and low cost, making it ideal for applications such as DIY projects, home automation, medical equipment, climate control systems, automotive electronics, and more.The RL3006-15.7K-155-D1 thermistor is constructed using a bead of sintered ceramics mounted on a metal rod. The bead contains small amounts of metal oxides which are sensitive to temperature changes. As the bead is exposed to heat or cold, the conductivity of the material will increase or decrease, resulting in a measurable change in electrical resistance.The working principle of the RL3006-15.7K-155-D1 is straightforward. It relies on the fact that the electrical resistance of the thermistor is inversely related to the temperature applied to it. In other words, when the temperature increases, the resistance decreases. The amount of resistance change is dependent on the NTC property of the thermistor and the temperature coefficient of the material it is made of. For every temperature increase of 1.0 °C, the resistance of the RL3006-15.7K-155-D1 thermistor decreases by 11.9 Ω.The RL3006-15.7K-155-D1 thermistor can be integrated into a variety of electronic devices and circuits including temperature controllers, industrial heating systems, automotive electronics, home automation, climate control systems, DIY projects, and more. In general, the thermistor is connected to an electrical power source, allowing it to measure the ambient temperature. The resistance of the thermistor is then compared to a reference voltage to determine the temperature.Besides measuring temperature, the RL3006-15.7K-155-D1 thermistor can also be used in surge protection and over-temperature protection solutions. The thermistor acts as an open circuit when the temperature is below a certain threshold. This is useful for surge protection, as it will limit current flow to a device if the current begins to exceed a certain threshold. Additionally, the thermistor can act as a switch to disconnect power when the temperature reaches too high, thus preventing overheating and protecting the device.Overall, the RL3006-15.7K-155-D1 thermistor is an excellent choice for applications where accurate and reliable temperature measurement is required. It combines a fast response time with simple construction and cost-effective integration, making it a popular choice among DIY makers and professional engineers alike. Its compatibility with a wide variety of electric circuits makes it suitable for a variety of applications, including temperature controllers, home automation, climate control systems, and more.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description