RLR05C1210FSBSL

Series:	Military, MIL-PRF-39017/05, RLR05
Packaging:	Bulk
Part Status:	Active
Resistance:	121 Ohms
Tolerance:	±1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 150°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.066" Dia x 0.150" L (1.68mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, one of the types of resistors, are manufactured in much the same way they were before the advent of surface mount technology. A small metallic element or actual "resistor" is encased in a cylindrical insulating material with wire leads extending from either side. This allows them to be mounted directly on the board instead of using a clip or mount. RLR05C1210FSBSL is a through-hole resistor with a wide range of applications and a relatively simple working principle. It is a metal-film resistor that is used to reduce the current flow and adjust the current in a circuit by limiting the voltage and dissipating power in the formof heat. It has a power rating of 0.5 watts, a 12V voltage, and 10 ohms of resistance. The working principle of any resistor is based on Ohm\'s Law, which states that the current passing through a resistor is directly proportional to the voltage applied across its terminals and inversely proportional to its resistance. This means that the more resistance a resistor has, the less current it will draw. The RLR05C1210FSBSL through-hole resistor is most commonly used for applications where low-power, precision resistors are required. Since it has a rather low power rating, it is not used for high-power applications like electric motors. Rather, it is used for controlling current levels in audio circuits, voltage regulators, power supplies, etc. Additionally, because of its small size, through-hole resistors are often preferred in applications where space is limited.In its most general form, a through-hole resistor is a passive two-terminal electrical component that reduces and/or adjusts the current flow in a circuit. It has a wide range of applications including motors, inverters, converters, power supplies, etc. It can also be used in analog and digital circuits for voltage and current regulation, voltage scaling, and signal conditioning.In addition to its use for current regulation, through-hole resistors can also be used to scale down a voltage signal, isolate different parts of a circuit, limit the current in a circuit, and to protect components from excessive current. The RLR05C1210FSBSL can be used in applications where tight tolerance and temperature stability is required. It is also used in applications where an adjustable current is required, such as for battery charging, solar panels, and electric vehicles.In conclusion, RLR05C1210FSBSL is a through-hole resistor that is used for a wide range of applications. It works on the principle of Ohm’s law and is used for current regulation and voltage scaling. It has a power rating of 0.5 watts, a voltage rating of 12V, and 10 ohms of resistance. Through-hole resistors are commonly used in applications where low-power, precision resistors are required and where space is limited. They can also be used to protect components from excessive current and to isolate different parts of a circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description