RLR05C1800GRB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are used to control electrical current in electrical circuits. There are many types of resistors including carbon composition, variable, network, wire-wound and SMD types. One type of resistor is the RLR05C1800GRB14 resistor, which is a through-hole resistor with a 2 watt power rating and 1800 Ohms resistance.

The RLR05C1800GRB14 has an extended dissipation power rating of 2 watts and can handle high temperatures with maximum operating temperature of 175 degrees Celsius and thermal dissipation power of 15.3 watts. It can also handle high currents with a rated operational current of 1.2 amps. Its electrical parameters include an operating voltage of 350 volts, a dielectric strength of 250 volts, and an insulation resistance of 500 Mohms. In addition, it has a creepage distance of 4.0mm and clearance of 4.0mm.

The RLR05C1800GRB14 is a through-hole resistor, which means that it is designed to be mounted on circuit boards using threaded fasteners. Through-hole resistors are used in a variety of applications, such as power supplies, motor controls, and various signal conditioning circuits. They can also be used in safety circuits, where they provide a fail-safe mechanism in the event that a circuit fails. In addition, they can also be used in heating circuits, where they provide stability to ensure that the circuit heats up to the desired temperature.

The RLR05C1800GRB14 works by reducing the flow of electrical current through the circuit. It does this by creating resistance within the circuit, which opposes the flow of current. The level of resistance is determined by the value of the resistor, and the resistance of the RLR05C1800GRB14 is 1800 Ohms.

When a voltage is applied across the RLR05C1800GRB14, the resistor works to reduce the flow of current through the circuit, which is known as the ‘load.’ This is why resistors are often referred to as ‘current limiting’ devices. The voltage and current of the system will be regulated by the resistor, and it can be used to adjust the current and voltage of the system as needed.

The RLR05C1800GRB14 is a useful type of resistor for a wide range of applications. It is designed to operate in extremely hot conditions, and can handle high currents and voltages as well. It has an extended dissipation power rating of 2 watts, and can handle high temperatures with maximum operating temperatures of 175 degrees Celsius. In addition, it has a dielectric strength of 250 volts, and an insulation resistance of 500 Mohms. With a creepage distance of 4.0mm and clearance of 4.0mm, it is safe to use in safety circuits. It is a through-hole resistor, and is used in a variety of applications such as power supplies, motor controls, signal conditioning circuits and heating circuits.

The specific data is subject to PDF, and the above content is for reference