RLR07C1504GMB14

Series:	Military, MIL-PRF-39017/01, RLR07
Packaging:	Bulk
Part Status:	Active
Resistance:	1.5 MOhms
Tolerance:	±2%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 150°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.250" L (2.29mm x 6.35mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	M (1%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: RLR07C1504GMB14

A through hole resistor is an electronic device that acts like a damper and reduces the current flow in an electrical circuit. It is typically composed of a conductor, insulator and backbone. The RLR07C1504GMB14 is one of the most commonly used resistors in electronic circuitry. The RLR07C1504GMB14 is a through hole mounted resistor composed of two elements: a body and a lead. It has a base resistance ohm of 150 and a power rating of 0.25 watts. The body of the resistor is constructed from a ceramic material which gives it its high temperature characteristics. The lead is generally made from a copper alloy or other metal. The RLR07C1504GMB14 is well suited for a wide range of applications, from LED illumination circuits to power conversion circuits. It can be used in analogue and digital systems, due to its low impedance and high frequency characteristics. It can be used in power supplies, of both AC and DC, in the control circuitry of power converters, or in motor or relay circuits. The working principle of the RLR07C1504GMB14 is simple. When a current is applied to the resistor, a voltage drop will occur across the resistor as it impedes the flow of current. This voltage drop is created due to the resistivity of the material and the construction of the resistor. The amount of voltage drop depends on the base resistance of the resistor and the amount of current flowing through the resistor.The RLR07C1504GMB14 is used frequently in power converters because it can handle higher wattage load and tends to offer greater temperature stability than other types of resistors. Its low thermal coefficient of resistance also allows it to maintain its desired resistance levels over a wide temperature range. It is also used in LED illumination circuits because of its low series inductance and its low parasitic capacitance which helps to reduce flickering in the circuit.Finally, the RLR07C1504GMB14 is also commonly used in motor control, relay control and timing circuits. In these applications, the resistor is usually used to create a delay in the circuit, by using a resistor in series with a capacitor. The resistor provides the current flow, while the capacitor stores the charge and is used to delay the current. This is done by adjusting the current flow through the resistor to a point where the charge stored in the capacitor is not enough to close the relay or trigger the timer. In conclusion, the RLR07C1504GMB14 through hole resistor is a versatile and reliable component for a wide range of electronic applications. Its ceramic body makes it capable of withstanding high temperatures and its low parasitic capacitance helps reduce flickering in LED circuits. It can be used in power conversion, motor control, and LED illumination circuits with great results.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description