RLR07C1802GRRSL

Series:	Military, MIL-PRF-39017/01, RLR07
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	18 kOhms
Tolerance:	±2%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 150°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.250" L (2.29mm x 6.35mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	R (0.01%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are electrical components used in electrical and electronic circuits to reduce or control voltage, current, or to act as a source of heat. Resistors typically consist of a strip of semiconductor material, either in a single package or embedded in the substrate in a multi-package assembly. Other resistors may be composed of a network of discrete components, or even a combination of both. The primary purpose of a resistor is to limit the flow of current within a circuit, providing a measure of safety for components which might otherwise be damaged or destroyed by excessive current levels.The RLR07C1802GRRSL is a through-hole resistor typically used in consumer electronics, auto electronics, and IT products. It is constructed from a ceramic substrate, encased in epoxy resin, and featuring two eyelet terminals. The resistor is rated for 1/8 watt, with a tolerance of ±5%. Due to its thermal resistance, the resistor is well suited for short-duration, low-power applications.The working principle of the RLR07C1802GRRSL is based upon Ohm’s law, which states that the current flowing through a conductor is proportional to the voltage applied across it. This relationship is also known as the resistance-voltage (R-V) relationship, and is expressed as a resistance value. The value of the resistor is determined by its construction and the material it is made from. In the case of the RLR07C1802GRRSL, the resistor is made from a ceramic substrate, which has a defined resistance value.The RLR07C1802GRRSL is typically used in applications that require very precise or specific voltage levels. It is commonly used in automotive, communications, and consumer electronics applications. In automotive applications, the resistor can be used to reduce the voltage going to a component in order to protect it from excessive current levels. In communications applications, it can be used to reduce the voltage in order to provide a precise energy waveform for transmission. In consumer electronics applications, it can be used to control the amount of current that flows within a circuit, thus providing precise levels of resistance or precision.In summary, the RLR07C1802GRRSL is a through hole resistor typically used in consumer electronics, auto electronics, and IT products. It is constructed from a ceramic substrate, encased in epoxy resin, and featuring two eyelet terminals. The resistor is rated for 1/8 watt, with a tolerance of ±5%. Its working principle is based on Ohm’s law, and is typically used in applications that require very precise or specific voltage levels.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description