RLR07C3R57FMRSL

Series:	Military, MIL-PRF-39017/01, RLR07
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	3.57 Ohms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 150°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.250" L (2.29mm x 6.35mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	M (1%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

。

Through Hole Resistors

Through hole resistors, also known as leaded resistors, are components that have leads extending through the printed circuit board to provide the necessary anchoring on both sides of the board. The most widely used format of through hole resistors is axial resistor, which consists of a resistor body and two male leads or wires that come out of either side of the resistor body. The through hole resistor works with low- to medium-dissipation power, and it is most suitable for servicing circuits with high-frequency pulsing circuitry.RLR07C3R57FMRSL is one of the typical example of axial resistors. As with other resistor components, RLR07C3R57FMRSL provides resistance to current flow, and its resistance value is related to the length and width of the resistor’s body. It also usually has a printed value to indicate the specific resistance it provides. The leads of RLR07C3R57FMRSL are usually round and small, and the leads have a predetermined length to ensure that the introduction of high-frequency components will not interfere with the resistance applied to the circuit.RLR07C3R57FMRSL has a wide range of application fields. One of its main application is to buffer current demands and limit the current of a circuit. It serves as a current limiter in power supplies and also in audio amplifiers. RLR07C3R57FMRSL can be used as a voltage divider, which is to use a potential difference across the resistor to decrease the voltage level of a signal. This can be used to protect sensitive circuits from higher voltage levels. Moreover, RLR07C3R57FMRSL can also be used as a low-pass filter. This function will attenuate high-frequency signals that go through the circuit thereby allowing low-frequency signals to pass through.The working principle of RLR07C3R57FMRSL is quite simple. It works by reducing the current flow between two points by providing resistance. This is done by increasing the amount of session for the current to traverse and thus reducing the same amount of power consumed. The resistance of the RLR07C3R57FMRSL is determined by the material used as well as the length and width of the resistor body.Furthermore, RLR07C3R57FMRSL can also serve as a temperature compensator for electronic components. This is usually achieved by the use of a thermistor or a negative temperature coefficient. This will ensure that the resistance remains constant when the temperature changes. This kind of resistor can also be used as a tone control in audio systems.In conclusion, RLR07C3R57FMRSL is an important kind of through hole resistors and can be used for various functions such as current limiting, voltage dividers, low-pass filters, temperature compensators and tone control. The working principle of it is simple and straightforward. It reduces the current flow between two points by providing resistance. By understanding its principles and applications, one can better utilize this component for a great variety of purposes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description