RLR07C4300GSB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through-hole resistor, also referred to as a mounted resistor, is a type of electronic component designed specifically for mounting on printed circuit boards. As its name suggests, the resistor is attached to the board via a hole or hole – usually by soldering, but it may also be bolted or snapped in place. Through-hole resistors come in various shapes and sizes, ranging from small, cube-shaped resistors to large, cylindrical ones.

RLR07C4300GSB14 is a through-hole resistor from Yageo, a company specializing in components used in the development and production of various types of electrical and electronic circuits. It is a compact ceramic type package, with a size of 5.08 mm x 7.76 mm. It is a balanced construction, constructed of materials chosen for their beneficial electrical characteristics and extremely low inductance. The resistor has an operating temperature range between -55°C and +125°C.

RLR07C4300GSB14 is suitable for a wide variety of applications, from high power DC and AC circuits to high frequency RF circuits. It is used in circuits where the flexible nature of the construction allows for high power ratings and minimal self-heating. It is also used in circuits that require low inductive or low capacitive performance along with low thermal resistance. It is useful for applications such as high reliability, pulse, RF, power management, uninterruptible power supplies, monitoring, power supplies, and battery charging.

As for the working principle, resistors are passive electronic components that limit the flow of current through a circuit or modify the voltage level in a circuit. They work in opposition to the current and are essential components in electrical and electronic circuits. The resistor works by adding resistance, which comes in the form of Ohm’s Law. According to this Law, current (I) is proportional to voltage (V) divided by resistance (R): I = V/R. This means that if a voltage is applied to a resistor, the current that flows through it will be equal to the voltage divided by the resistance.

RLR07C4300GSB14 is a power rated, ceramic based, through hole resistor that is designed and manufactured for applications that need high power and minimal self-heating. It is suitable for applications on high power AC and DC circuits and high Frequency RF circuits. It is also used in circuits that require low inductive or low capacitive performance and low thermal resistance.

The specific data is subject to PDF, and the above content is for reference