RLR07C75R0GSB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components of a basic electrical circuit, and the RLR07C75R0GSB14 is a resistor of this kind. It is one of the most commonly used types in modern electronics due to its simplicity, efficiency, and reliability.

The RLR07C75R0GSB14 has a wide range of applications. It is widely used in many electronic devices such as cell phones, PCs, vidoes, and other consumer electronics. It can also be used in industrial equipment, such as motors and pumps. It is also commonly used in high-frequency radio-frequency circuits, especially in transmitters and receivers.

The working principle of RLR07C75R0GSB14 is based on the fact that electricity moving through a conductor meets resistance. This resistance causes the electrical current to dissipate, which is how the resistor regulates the flow of the electrical current. This resisting effect is generated by the physical structure of the resistor, which consists of two or more terminals that are connected by a conductor. The conductor is typically made of a material such as copper, which has a higher resistance than air, which allows it to limit the flow of current. The resistance is most commonly measured in ohms, and can range from a few ohms up to several thousands depending on the specific resistor.

The RLR07C75R0GSB14 is a standard, through-hole type of resistor. This means that the resistor is through-hole mounted, meaning the leg is placed directly through a hole in the printed circuit board, and soldered in place. The resistor is fixed in place this way, and it is very difficult to remove from the board without destroying the resistor. The resistor is constructed of two main components, the ceramic core and wires or leads. The ceramic core is typically a ceramic or polyester material, and it determines the total resistance of the resistor. The leads, usually a copper alloy, are attached to terminals which connect the resistor to other components within the circuit.

Through Hole Resistors, of which the RLR07C75R0GSB14 is an example, are an essential component of any electrical circuit. As they are relatively inexpensive, they are widely used in the production of consumer electronics and industrial equipment. Typically, through hole resistors will have higher power and voltage ratings than other types of resistors, making them ideal for use in high-power circuits. They are also generally more stable than surface mounted resistors.

The specific data is subject to PDF, and the above content is for reference