RLR20C6801GRRSL

Series:	Military, MIL-PRF-39017/02, RLR20
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	6.8 kOhms
Tolerance:	±2%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 150°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.138" Dia x 0.375" L (3.51mm x 9.53mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	R (0.01%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistor (THR) is one of the most common type of resistors that are used in the industry for various applications. The type of resistor that is commonly used is the RLR20C6801GRRSL type resistor, which is a two-terminal device with a maximum power rating of 30 W and a resistance of 6801Ω. This resistor type is ideal for a variety of applications due to its high power rating and wide operating temperature range(-55°C to +150°C). This resistor type provides precise resistance values in a wide range of temperatures and offers excellent performance in high-frequency circuits.

RLR20C6801GRRSL Application Field

The RLR20C6801GRRSL type resistor has a wide range of applications. These applications include use in audio equipment, automotive electronics, industrial control systems, instrumentation, electrical motor control systems, and robotics. This resistor is also used to provide current limiting in power supplies, current sensing in power systems, and to improve signal to noise ratios in radio frequency receivers. This resistor is also well suited for use in high-voltage circuits where it can provide reliable operation under extreme conditions.

Working Principle

The RLR20C6801GRRSL is a through hole resistor and works on the principle of Ohm’s law. This law states that resistance is directly proportional to current and indirectly proportional to voltage. As the applied voltage to the resistor increases, current through the resistor also increases and the resistance value decreases. As the applied voltage decreases, current decreases and the resistance increases. This resistor has a tolerance rating of ±5%, which means that at a given voltage or current level, the resistor value might vary from its nominal value by 5%.This resistor is constructed with an anodized substrate which makes it corrosion-resistant and highly stable at elevated temperatures. The resistance element is made up of a series of copper strips, which are coated with a resistor paste or a polymer layer. The resistance element is then connected to a pair of pins and then soldered to the board.

Conclusion

The RLR20C6801GRRSL through hole resistor is a reliable and versatile resistor that can be used in a variety of applications. This resistor type is ideal for applications that require precise resistance values in a wide range of temperatures and also in high-frequency circuits. This resistor allows for the current to be accurately controlled in order to yield a desired voltage or current levels. Its anodized substrate makes it corrosion-resistant and highly stable at elevated temperatures. Therefore, it can be a great choice for a variety of applications where reliable performance is necessary.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description